Frequency Modulated Continuous Wave (FMCW) Light Detection and Ranging (LiDAR) has received extensive attention, owing to its high robustness and accuracy, and its extensive applications in the automotive and robotics domains. However, mainstream demonstrations predominantly rely on high-performance yet expensive instrumentation, which poses a significant barrier to the widespread manufacturing of FMCW LiDAR systems. In this study, we introduce a novel Laser Frequency Modulation and Beat Signal Processing module (LFM-BSP) realized on a Field Programmable Gate Array (FPGA). The LFM-BSP is distinguished by its full functionality, encompassing all essential electronic operations required by FMCW LiDARs. The LFM-BSP adopts pre-distortion approach to generate linear modulation waveform of nonlinear laser source. Utilizing the waveform, a fully functional, standalone FMCW LiDAR prototype was developed based on the LFM-BSP. The prototype incorporates a 2-axis galvanometer to facilitate beam steering. Simultaneous ranging and velocimetry experiments were performed, resulting in ranging and velocimetry precision of 0.011 m and 0.059 m/s, respectively. Furthermore, the prototype’s capability in 4D point cloud imaging was evaluated. The results suggest that the LFM-BSP is highly suitable for automotive LiDAR applications, thereby offering a practical framework for the development of next-generation monolithic FMCW LiDAR systems.
23 September 2025 in IEEE Transactions on Instrumentation and Measurement
Silicon-based optical phased array (OPA) can achieve full solid-state beam steering, which is a promising solution for next-generation Lidar. As OPA research progresses, OPA Lidar is approaching readiness for industrial application. However, most of the OPAs are mainly configured with digital-to-analog converters (DAC), which suffers from high power consumption, low efficiency, high cost, and complex circuitry, especially for thermal-optical OPA. Here we design a control system for thermal-optical OPA based on bipolar pulse width modulation (BPWM). Compared with DAC-based solution, our system maintains comparable performance in terms of spot quality, detection performance, etc. Additionally, the heat load on the OPA chip is effectively reduced, the average power consumption of the system is reduced by 74.4%, the average operating efficiency of the driver module improved to a factor of 3.96 of the original one, and the device cost has also been significantly reduced. Finally, an OPA Lidar prototype is constructed based on our PWM control system, which is able to obtain clear 4D point cloud. To our best knowledge, this is the first demonstration of point cloud imaging by OPA Lidar system with PWM control. This work facilitates the commercialization of OPA Lidar.
In this paper, a Light Detection and Ranging (LiDAR) system based on a hybrid modulation technique is proposed, which integrates ranging, velocimetry, and communication functions. First, the system performs pulse width modulation (PWM) on the baseband signal. This PWM-modulated signal controls the on-off keying (OOK) modulation of the high-frequency sinusoidal signal. Then, the OOK-modulated signal is used to perform pulse-based intensity modulation on a continuous-wave laser, which is then transmitted toward the target. Thus, the system incorporates a hybrid modulation scheme combining PWM, OOK, and intensity modulation. Experimental results demonstrate that the time interval of the pulsed signal enables coarse positioning of distant targets, while phase difference measurements of the high-frequency sinusoid within each pulse ensure ranging precision better than 9 mm. The Doppler frequency shift induced by target motion is utilized to measure dynamic target velocity, achieving a precision better than 7.98 mm/s. Accurate demodulation of the baseband signal is achieved through pulse-width extraction from the echo signal. Furthermore, multi-dimensional point cloud images of various targets are successfully realized. This work provides a viable technical approach for developing multi-functional-integrated LiDAR systems.