Per‐ and polyfluoroalkyl substances (PFAS) are emerging contaminants of critical concern. As surfactants, PFAS tend to accumulate at air‐water interfaces and may stay in the vadose zone for long times before contaminating groundwater. Yet not well understood, the extent of retention in the vadose zone has critical implications for risk management and remediation strategies. We present the first mathematical model that accounts for surfactant‐induced flow and solid‐phase and air‐water interfacial adsorption. We apply the model to simulate PFOS (a PFAS compound of primary concern) transport in the vadose zone at a model fire‐training area site impacted by aqueous film‐forming foam (AFFF). Air‐water interfacial adsorption is shown to have a significant impact—amplified by the low water content due to gravity drainage—total retardation factors range from 233 to 1,355 for the sand and 146 to 792 for the soil used in the study. The simulations illustrate it can take several decades or longer for PFOS to reach groundwater. Counterintuitively, the lower water content in the sand—due to stronger drainage and weaker capillary retention—leads to retardation factors greater than for the soil. Also, most PFOS is adsorbed at air‐water interfaces with only 1–2% in the aqueous phase. The implications include (1) fine‐texture materials could have lower retardation factors than sand due to higher retained water content, (2) soil PFAS concentrations are likely to be orders of magnitude higher than those in groundwater at source zones. Both implications are consistent with recent field observations at hundreds of AFFF‐impacted sites.
We report theoretical and numerical studies of the flow behaviour when a fluid is injected into a confined porous medium saturated with another fluid of different density and viscosity. For a two-dimensional configuration with point source injection, a nonlinear convection–diffusion equation is derived to describe the time evolution of the fluid–fluid interface. In the early time period, the fluid motion is mainly driven by the buoyancy force and the governing equation is reduced to a nonlinear diffusion equation with a well-known self-similar solution. In the late time period, the fluid flow is mainly driven by the injection, and the governing equation is approximated by a nonlinear hyperbolic equation that determines the global spreading rate; a shock solution is obtained when the injected fluid is more viscous than the displaced fluid, whereas a rarefaction wave solution is found when the injected fluid is less viscous. In the late time period, we also obtain analytical solutions including the diffusive term associated with the buoyancy effects (for an injected fluid with a viscosity higher than or equal to that of the displaced fluid), which provide the structure of the moving front. Numerical simulations of the convection–diffusion equation are performed; the various analytical solutions are verified as appropriate asymptotic limits, and the transition processes between the individual limits are demonstrated. The flow behaviour is summarized in a diagram with five distinct dynamical regimes: a nonlinear diffusion regime, a transition regime, a travelling wave regime, an equal-viscosity regime, and a rarefaction regime.