Sungho Park

Sungho Park

Auto-generated profile, based on publicly available information

Sungho Park

Korea Institute of Robotics & Technology Convergence, Pohang 37666, Republic of Korea

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 May 2024 in Sensors
Verified
Journal Article
Open access
PDF file
KJKwangWoo Jeon
KwangWoo Jeon
EJEui-Jung Jung
Eui-Jung Jung
JBJongho Bae
Jongho Bae
SPSung-Ho Park
Sung-Ho Park
JKJungjun Kim
Jungjun Kim
HYHak Yi
Hak Yi
This paper describes the development of an in-pipe inspection robot system designed for large-diameter water pipes. The robot is equipped with a Magnetic Flux Leakage (MFL) sensor module. The robot system is intended for pipes with diameters ranging from 900 mm to 1200 mm. The structure of the in-pipe inspection robot consists of the front and rear driving parts, with the inspection module located centrally. The robot is powered by 22 motors, including eight wheels with motors positioned at both the bottom and the top for propulsion. To ensure that the robot’s center aligns with that of the pipeline during operation, lifting units have been incorporated. The robot is equipped with cameras and LiDAR sensors at the front and rear to monitor the internal environment of the pipeline. Pipeline inspection is conducted using the MFL inspection modules, and the robot’s driving mechanism is designed to execute spiral maneuvers while maintaining contact with the pipeline surface during rotation. The in-pipe inspection robot is configured with wireless communication modules and batteries, allowing for wireless operation. Following its development, the inspection robot underwent driving experiments in actual pipelines to validate its performance. The field test bed used for these experiments is approximately 1 km in length. Results from the driving experiments on the field test bed confirmed the robot’s ability to navigate various curvatures and obstacles within the pipeline. It is posited that the use of the developed in-pipe inspection robot can reduce economic costs and enhance the safety of inspectors when examining aging pipes.

3 April 2018 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
PDF file
CKChangsu Kim
Changsu Kim
CLChristian Ludwig
Christian Ludwig
SPSungho Park
Sungho Park
CICheongbin Im
Cheongbin Im
The tire is the vital element in vehicle dynamics, as its contact patch transmits all forces and moments to the ground (accelerating, braking, cornering, rolling).Over the recent decades tire development for passenger cars has been continuously improved and optimized in order to achieve a good overall vehicle performance in R&H that is in balance with all other tire performances (Wear, Durability, NVH, RR, Miles). This general development process has to be suitable for various vehicle types from regular passenger cars over eco-friendly hybrid or electric vehicles to high performance sport cars. The balance between Ride and Handling performance is further adjusted to local customer preferences that are usually distinguished by markets (US, EU, Asia).The tire development process, which is embedded in the overall vehicle development, is usually realized in a mutual collaboration between OEM and tire supplier.This process starts with the definition of tire performance targets, which are regularly checked and aligned with the overall vehicle performance during the development phase until the final joint evaluation that confirms the target achievement level at end of the development.There are two evaluation methods for tire performance:subjective evaluation of R&H performances from full vehicle experimentsobjective measurements from subcomponent and full vehicle experiments.In detail of tire evaluation, tire performances are historically evaluated during subjective test drives on R&H manoeuvers/tracks. The subjective evaluation could show a level of both good and bad, but it is not easy way to keep a consistency of evaluation and guide a clear direction of improvement depend on evaluator’s skill level and external effects such as road condition and weather condition.Objective measurements that represent realistic driving conditions could be used to make the development process more robust and support the initial target setting and guarantee coherence of evaluation throughout the entire process.This paper goal is to expand objective evaluation’s contribution into the tire development process. For it, the test of objective evaluation should be reliable to represent realistic driving conditions, repeatable for repetition test, robust for noise effect which would be happen during test. And tire characteristics values from extracting force and moment of tire have to get a good correlation with vehicle handling performances. Then objective evaluation could be used more active in the tire development process than before. This paper would like to introduce what kinds of activities are necessary to be reliable tire test measurement and how to prove the correlation between tire characteristics and vehicle performance.In the following studies four improvements of the objective measurements and their extracted key characteristics have been achieved. The first improvement focused on tire measurements, by applying realistic conditions for pretest and measurements of tire characteristics. The second dealt with the alignment of measurement procedures between OEMs and tire makers. In order to establish robust standards that can be evaluated in terms of measurement repeatability and deviation. The third improvement was a large study of correlation between tire characteristics and vehicle performances; using simulation. And the last improvement consisted of storing tire characteristics values in a centralized database in order to set robust tire targets, based on performance prediction and continuous quality control.The above mentioned improvements of test procedures and key characteristics, have increased pace and efficiency of the tire development process.

1 December 2022 in Journal of Korea Robotics Society
Verified
Journal Article
Closed access
EJEui-Jung Jung
Eui-Jung Jung
SPSungho Park
Sungho Park
JKJin Kyu Kang
Jin Kyu Kang
SSSo Eun Son
So Eun Son
Gun Rae ChoGun Rae Cho
Gun Rae Cho
YLYoungho Lee
Youngho Lee

26 November 2025 in Sensors
Verified
Journal Article
Open access
PDF file
CBChulhee Bae
Chulhee Bae
Gun Rae ChoGun Rae Cho
Gun Rae Cho
JBJongho Bae
Jongho Bae
SPSungho Park
Sungho Park
MLMangi LEE
Mangi LEE
JPJung Hyeun Park
Jung Hyeun Park
This study introduces Cylindrical Scan Context (CSC), a novel LiDAR descriptor designed to improve robustness and efficiency in GPS-denied or degraded outdoor environments. Unlike the conventional Scan Context (SC), which relies on azimuth–range projection, CSC employs an azimuth–height representation that preserves vertical structural information and incorporates multiple physical channels—range, point density, and reflectance intensity—to capture both geometric and radiometric characteristics of the environment. This multi-channel cylindrical formulation enhances descriptor distinctiveness and robustness against viewpoint, elevation, and trajectory variations. To validate the effectiveness of CSC, real-world experiments were conducted using both self-collected coastal–forest datasets and the public MulRan–KAIST dataset. Mapping was performed using LIO-SAM with LiDAR, IMU, and GPS measurements, after which LiDAR-only localization was evaluated independently. A total of approximately 700 query scenes (1 m ground-truth threshold) were used in the self-collected experiments, and about 1200 scenes (3 m threshold) were evaluated in the MulRan–KAIST experiments. Comparative analyses between SC and CSC were performed using Precision–Recall (PR) curves, Detection Recall (DR) curves, Root Mean Square Error (RMSE), and Top-K retrieval accuracy. The results show that CSC consistently yields lower RMSE—particularly in the vertical and lateral directions—and demonstrates faster recall growth and higher stability in global retrieval. Across datasets, CSC maintains superior DR performance in high-confidence regions and achieves up to 45% reduction in distance RMSE in large-scale campus environments. These findings confirm that the cylindrical multi-channel formulation of CSC significantly improves geometric consistency and localization reliability, offering a practical and robust LiDAR-only localization framework for challenging unstructured outdoor environments.

Verified
Journal Article
Open access
PDF file
Gun Rae ChoGun Rae Cho
Gun Rae Cho
HKHyungjoo Kang
Hyungjoo Kang
Min-Gyu KimMin-Gyu Kim
Min-Gyu Kim
SPSungho Park
Sungho Park
CBChulhee Bae
Chulhee Bae
JLJi-hong Li
Ji-hong Li
This paper presents a robust trajectory-tracking control framework for underwater vehicles operating in a relative coordinate system. Unlike conventional methods that define trajectories in the world frame, the proposed approach formulates the control problem directly in a moving reference frame, enabling accurate motion control with respect to dynamic and drifting objects affected by environmental disturbances such as ocean currents and waves. This relative-space formulation is particularly advantageous for tasks including diver guidance, floating-object inspection, and docking, where the reference itself is nonstationary. A coordinate transformation is introduced to consistently express the vehicle dynamics in the relative frame. Based on the transformed dynamics, a Time Delay Control (TDC) law is applied to estimate unmodeled dynamics and external disturbances without requiring precise system parameters. Theoretical stability analysis shows that the stability condition of the proposed controller is consistent with that of conventional TDC, allowing similar gain-tuning procedures. Simulation results demonstrate that the proposed controller achieves robust and smooth trajectory tracking even when the reference frame undergoes motion induced by ocean currents.

1 March 2023 in Journal of Korea Robotics Society
Verified
Journal Article
Closed access
EJEui-Jung Jung
Eui-Jung Jung
SPSung Ho Park
Sung Ho Park
KJKwangWoo Jeon
KwangWoo Jeon
HSHyunseok Shin
Hyunseok Shin
YCYunyong Choi
Yunyong Choi