Nanostructured materials become more and more a part of our daily life, partly as self-assembled particles or artificially patterned. These nanostructures often possess intrinsic magnetic and/or electric fields which determine (at least partially) their physical properties. Therefore it is important to be able to measure these fields reliably on a nanometre scale. A rather common instrument for the investigation of these fields is the transmission electron microscope as it offers high spatial resolution. The use of an electron microscope to image electric and magnetic fields on a micron down to sub-nanometre scale is treated in detail for transmission electron microscopes (TEM) and scanning transmission electron microscopes (STEM). The formation of contrast is described for the most common imaging modes, the specific advantages and disadvantages of each technique are discussed and examples are given. In addition, the experimental requirements for the use of the techniques described are listed and explained.
The polarization fields in wurtzite group III-nitrides strongly influence the optical properties of InAlGaN-based light emitters, e.g., the electron and hole wave function overlap in quantum wells. In this paper, we propose a new approach to determine these fields by capacitance-voltage measurements (CVM). Sheet charges generated by a change of the microscopic polarization at heterointerfaces influence the charge distribution in PIN junctions and therefore the depletion width and the capacitance. We show that it is possible to determine the strength and direction of the internal fields by comparing the depletion widths of two PIN junctions, one influenced by internal polarization fields and one without as a reference. For comparison, we conducted coupled Poisson/carrier transport simulations on the CVM of the polarization-influenced sample. We also demonstrate the feasibility and limits of the method by determining the fields in GaN/InGaN and GaN/AlGaN double heterostructures on (0001) c-plane grown by metal organic vapor phase epitaxy and compare both evaluation methods. The method yields (−0.50 ± 0.07) MV/cm for In0.08Ga0.92N/GaN, (0.90 ± 0.13) MV/cm for Al0.18Ga0.82N/GaN, and (2.0 ± 0.3) MV/cm for Al0.31Ga0.69N/GaN heterostructures.