Laboratory of Electronic, Electrical Engineering, Automation and Telecommunication, National Higher Polytechnic School of Douala, University of Douala, Douala, Cameroon
Auto-generated profile, based on publicly available information
Charles Hubert Kom
Laboratory of Electronic, Electrical Engineering, Automation and Telecommunication, National Higher Polytechnic School of Douala, University of Douala, Douala, Cameroon
A new de‐excitation system for advanced brushless excitation based on a synchronous generator is presented. The proposed system uses a discharge resistor in series with a freewheeling diode of a buck chopper. It improves the reliability of the entire power plant and can be used on several excitation systems. It can be used in case of programmed shutdown of the generator and also shows good results in voltage regulation without destroying the efficiency of the excitation system under nominal operation. An analysis of the system has allowed us to suggest a methodology to obtain the appropriate value of the discharge resistance to be used. The validation of the proposed system has been done through simulations in the Matlab/Simulink environment, supported by experimental tests.
23 April 2021 in European Journal of Electrical Engineering
In this article, we propose a strategy for finding the maximum power point (MPP) of a hybrid plant (solar and wind), in order to maximize the power extracted from this production plant. This strategy exploits the perturbation and observation method, based on fuzzy logic coupled with the Duty Cycle Modulator (DCM). The main objective of this study is to extract the maximum power from this hybrid power plant, while ensuring the precision and speed of convergence towards this point of maximum power. This method, tested under the Matlab / Simulink environment for a 160 kW hybrid power plant, gave results that we compared to those obtained with the Fuzzy - PWM (Pulse Width Modulator) strategy. It emerges that the Fuzzy-DCM strategy gives better precision (around 2.6 times) and a speed (around 2 times) of convergence compared to the Fuzzy-PWM strategy.