15 April 2021 in IEEE Access
Long service time and excessive vibration of aero-engine will cause failure of clamps, which usually fix pipelines on the outside of an aero-engine. In this paper, the nonlinear vibration characteristics caused by loosening clamps in aero-engine pipeline are determined. According to the real parameters of an aero-engine clamp-pipeline test rig, the clamp is simplified into a nonlinear spring-damping. Thus, a clamp-pipeline nonlinear model based on cubic stiffness is established. The multi-scale method is used to obtain the analytical solution of the nonlinear model. Based on the real test data, the model parameters of the clamp-pipeline nonlinear system are identified, and then the nonlinear vibration characteristics of the system are obtained. Finally, using the vibration transmissibility method, the influence of the severity of clamp loosening on the nonlinear vibration characteristics of the system is obtained.
11 January 2022 in IEEE Transactions on Industrial Informatics
Operation conditions such as rub-impact and misalignment usually accumulate and can eventually induce severe faults in rotor systems. These abnormal conditions often make rotor systems behave nonlinearly. Consequently, nonlinear signal and systems analyses have been applied to address rotor system condition monitoring and fault diagnosis problems. Nonlinear frequency response functions (NOFRFs) are a concept proposed to extend the well-known concept of frequency response function to the nonlinear case, and have recently been exploited to solve problems with signal analysis based rotor system condition monitoring and fault diagnosis. However, existing NOFRFs based analyses require conducting offline experiments on rotor systems. This cannot satisfy the industrial need of continuous monitoring of rotor system operational conditions, which is important for online fault diagnosis. In order to resolve this problem, the present article proposes a novel approach that performs the rotor system condition monitoring using the NOFRFs determined directly from the rotor system online operational data which are inherently harmonics. This approach involves the identification of a data-driven NARX (nonlinear auto regressive with eXegenous input) model of rotor systems from harmonic excitations and corresponding responses, evaluation of rotor system NOFRFs using the identified NARX model, and the use of evaluated NOFRFs for rotor system operational condition monitoring and fault diagnosis. The approach, for the first time, enables the NOFRFs to be applied to perform online monitoring of rotor systems. Experimental studies have been conducted to verify the effectiveness and potential applications of the proposed approach as well as its advantages over commonly used signal analysis based techniques.
27 October 2021 in IEEE Access
Based on the Bouc-Wen model, a nonlinear hysteretic restoring force model is established with dynamic equations. The hardening and softening of the material after reaching the yield limit are described by the nonlinear restoring force-displacement hysteretic curve. The Gamultiobj algorithm and the group search optimization (GSO) algorithm are used to fit and identify the material softening and hardening hysteresis curves, respectively. The effectiveness of the optimization algorithm for identifying the parameters of the hysteretic model is verified, and the optimization effects of the two algorithms are compared. The results show that the Gamultiobj algorithm has better parameter identification ability and curve fitting ability for the hysteretic model. Then, the hysteresis curve describing the nonlinear characteristics of a clamp is obtained through the static stiffness experiment of the clamp. The experimental curve is fitted by the Gamultiobj algorithm. As a result, the nonlinear Bouc-Wen model parameters of the clamp are obtained, and the stiffness and damping of the clamp are recognized. The distribution statistics of the obtained parameters are performed, and it is found that each parameter satisfies a certain probability distribution, which indicates that the parameter identification result is reasonable.
21 October 2024 in IEEE Transactions on Industrial Informatics
Lifelong learning (LL) has proven successful in computer vision and natural language processing, but its applications in condition monitoring are still largely understudied. To bridge this gap, this article innovatively proposed a LL-based condition monitoring framework for rotating machinery over the whole life cycle. First, the development of LL is reviewed and summarized. Inspired by the core idea of knowledge maintenance and transfer in LL, the innovation of this article is to integrate data-driven modeling with LL to extract process knowledge-driven features for autonomous condition monitoring. This opens up an emerging lifelong monitoring paradigm for mechanical systems. Based on the extracted features learned from the data-driven model, a threshold construction method and an online monitoring strategy are integrated into the monitoring framework. Finally, the utility of the proposed framework is demonstrated through the rolling bearing performance degradation and shaft fatigue fracture test cases. Compared to the state-of-the-art monitoring methods, the proposed framework shows significantly improved adaptability and reliability.
1 December 2023 in IEEE Transactions on Instrumentation and Measurement
Rotor systems are important parts of rotating machinery. Real-time health monitoring of rotor systems is essential for safe operation. Data-driven modeling based on sensor data is currently the focus of health monitoring, which solves the problem that traditional physical modeling cannot be applied to complex mechanical equipment. Parameters uncertainty of data-driven modeling is inevitable, and analyzing and utilizing this uncertainty is critical to improving the adaptability of data-driven monitoring methods. This article focuses on the uncertainty quantification of fault features under the uncertainty of data-driven model parameters. Combined with Monte Carlo simulation and Latin hypercube sampling, the influence mechanism of system performance degradation on the quantification of feature uncertainty is analyzed. Finally, a Jeffcott rotor test rig with a rub-impact device was built, and the feature uncertainty caused by the nonlinear autoregressive with exogenous input (NARX) model parameter uncertainty was explained. The experimental results show that the reliability of the proposed fault features based on the uncertainty is significantly better than the traditional signal-based features, which significantly improves the adaptability of the data-driven method in the health assessment of the rotor system.