Direct printing of functional electronic materials may provide a new route to low-cost fabrication of integrated circuits. However, to be useful it must allow continuous manufacturing of all circuit components by successive solution deposition and printing steps in the same environment. We demonstrate direct inkjet printing of complete transistor circuits, including via-hole interconnections based on solution-processed polymer conductors, insulators, and self-organizing semiconductors. We show that the use of substrate surface energy patterning to direct the flow of water-based conducting polymer inkjet droplets enables high-resolution definition of practical channel lengths of 5 micrometers. High mobilities of 0.02 square centimeters per volt second and on-off current switching ratios of 10 5 were achieved.
An all-polymer semiconductor integrated device is demonstrated with a high-mobility conjugated polymer field-effect transistor (FET) driving a polymer light-emitting diode (LED) of similar size. The FET uses regioregular poly(hexylthiophene). Its performance approaches that of inorganic amorphous silicon FETs, with field-effect mobilities of 0.05 to 0.1 square centimeters per volt second and ON-OFF current ratios of >10 6 . The high mobility is attributed to the formation of extended polaron states as a result of local self-organization, in contrast to the variable-range hopping of self-localized polarons found in more disordered polymers. The FET-LED device represents a step toward all-polymer optoelectronic integrated circuits such as active-matrix polymer LED displays.
Over the past 25 years, organic field‐effect transistors (OFETs) have witnessed impressive improvements in materials performance by 3–4 orders of magnitude, and many of the key materials discoveries have been published in Advanced Materials. This includes some of the most recent demonstrations of organic field‐effect transistors with performance that clearly exceeds that of benchmark amorphous silicon‐based devices. In this article, state‐of‐the‐art in OFETs are reviewed in light of requirements for demanding future applications, in particular active‐matrix addressing for flexible organic light‐emitting diode (OLED) displays. An overview is provided over both small molecule and conjugated polymer materials for which field‐effect mobilities exceeding > 1 cm2 V–1 s–1 have been reported. Current understanding is also reviewed of their charge transport physics that allows reaching such unexpectedly high mobilities in these weakly van der Waals bonded and structurally comparatively disordered materials with a view towards understanding the potential for further improvement in performance in the future.