Mixing in extrusion is a vital part of achieving consistent and high-quality extrudates, with residence time being an elucidative measure of the mixing performance. Recent studies around numerical modeling of residence time distributions in single-screw extruders appear to consider flooded extruders mainly. This paper introduces a new and general CFD model to characterize the extruder fill length and residence time distribution for a viscoplastic ceramic material in a starve-fed extruder, including free surface tracking. The CFD model simulates a pulse-injection test, where a fluid parcel is injected at the inlet, with subsequent outlet concentration measured over time. The study includes material characterization and model validation based on laboratory tests. Results quantify the impact of accounting for the partially filled extruder instead of assuming it to be flooded, addressing the potential error when only considering simple analytical approximations to calculate system average residence times. Results further show the ability to fit simulation results to more simple analytical models. This underlines the importance of including the entire extrusion system and forming the basis for further work toward enabling real-time model predictions in starve-fed extrusion systems.
19 March 2024 in The International Journal of Advanced Manufacturing Technology
This research delves into the numerical predictions of fill-level and residence time distribution (RTD) in starve-fed single-screw extrusion systems. Starve-feeding, predominantly used in ceramic extrusion, introduces challenges which this study seeks to address. Based on a physical industrial system, a comprehensive 3D computational fluid dynamics (CFD) model was developed using a porous media representation of the complex multi-hole plate die. Validations performed using real sensor data, accounting for partial wear on auger screw flights, show an ~11% discrepancy without accounting for screw wear and ~6% when considering it. A 2D convection-diffusion model was introduced as a dimensionality reduced order model (ROM) with the intention of bridging the gap between comprehensive CFD simulations and real-time applications. Central to this model’s prediction ability was both the velocity field transfer from the CFD model and calibration of the ROM diffusion coefficient such that a precise agreement of residence time distribution (RTD) curves could be obtained. Some discrepancies between the CFD and the ROM were observed, attributed to the loss of physical information of the system when transitioning from a higher fidelity CFD model to a semi-mechanistic ROM and the inherent complexities of the starved flow in the compression zone of the extruder. This research offers a comprehensive methodology and insights into reduced order modeling of starve-fed extrusion systems, presenting opportunities for real-time optimization and enhanced process understanding.