1 January 2021 in Advances in Civil Engineering
Adopting an effective top coal caving method is the key to enhancing coal recovery and reducing gangue content for the fully mechanized top coal caving working face with extra‐thick coal seams. In this study, the movement of coal particles generated during top coal caving is considered to follow a normal distribution. Then, the caving body and coal‐rock settlement along the working face during the caving process are studied based on both the random media theory and probability theory. Accordingly, the optimal caving interval and caving sequences are determined, and a novel interval symmetrical coal caving method is proposed. The proposed method is systematically verified with results from physical similarity tests, and different caving methods are assessed by field tests. The results show the following: (1) The coal‐rock settlement and the caving body demonstrate clear axial symmetrical features along the working face; the size of the caving body increases as the caving height grows and its shape turns progressively from semicircular to semielliptical with a lower foot of the coal‐rock settlement. (2) The caving interval is derived using the sum of the radii of the coal‐rock settlement curves formed by the two largest caving bodies. (3) The symmetrical caving approach provides a symmetrical space for the subsequent movement of the broken top coal, which enables a uniform development of the caving body. (4) Compared with the traditional sequential coal caving method with the same number of supports, the interval symmetrical caving method results in a 21.7% of coal production increase, 17% caving rate promotion, and a shortened caving time by 23.4%. (5) The interval symmetrical caving method is found to improve the controllability of the caving process at the fully mechanized top coal caving working face. In general, this work presents a theoretical approach to select the optimal caving methods for the fully mechanized caving working face in extra‐thick coal seams for an improved production efficiency of the work face. The results of this study can also provide theoretical significance and referencing value for quantitative analyses of the coal caving methods for work faces with similar geological conditions.
1 January 2022 in Advances in Civil Engineering
The dynamic sedation of the coal mine production is alternate or superimposed in coal rocks, which causes crack unevenness due to the presence of jacquards, causing unregistered coal blocks. By observing the deformation and fracture characteristics of coal‐rock interbedding specimens with different gangue ratio under different stress paths, this paper studies the fracture instability mechanism and fracture characteristics of coal‐rock interbedding, analyzes the progressive failure process and fracture opening model of coal‐rock interbedding, and uses GDEM software to simulate the triaxial loading and unloading failure characteristics of coal‐rock samples. The results show that the ratio of gangue inclusion has a significant effect on the structural strength of coal rock interbedding; with the unloading, the coal rock interbedding of the top coal body will be damaged and destroyed to varying degrees and asynchronously, the coal rock interbedding of the top coal body will present various forms of failure characteristics according to the changes of horizontal stress gradient in the vertical direction; the progressive failure process of coal rock interbedding under loading and unloading conditions can be divided into three stages. As the jigs are raised, the crack nonstable expansion stress of the composite coal body sample is gradually increased; and the rising ratio of the jacket X is not complete. The striped conjugated shear failure characteristics are more obvious; the different combined coal gangue tester shows microcrack near the peripheral loading boundary, and as the loading axis pressure increases, the fracture distribution range and density are increased; the rock layer is present. The tensile fracture is destroyed, and the coal seam exhibits shear destruction of intensive cracks; different test pieces produce significant tensile destruction on one side of the unloaded boundary; the greater the loaded axial pressure of the specimen, the greater the damage degree of the specimen after unloading; the damage degree of two coal and one rock specimens is the largest, the damage degree of one coal and one rock specimens is in the middle, and the damage degree of one coal and two rock specimens is the smallest.
19 January 2021 in Shock and Vibration
Considering the large mined area, wide strata moving range, strong mine pressure occurrence, and difficult roof control for the fully mechanized top coal caving in 20 m ultra‐thick coal seams, this study analyzes the strata structure evolution and mine pressure occurrence behavior through field test, numerical simulation, and theoretical analysis. Based on the mine condition of the Tashan Coal Mine in the Datong mining area, mechanical models are established for the compound overlying structures. The following can be demonstrated from this study: (1) The hard strata can form three different compound spatial structures at different positions in the overlying rock strata, including the lower combined cantilever structure I, the middle combined cantilever structure II, and the upper hinged structure. (2) Failure of the higher structure can induce compression on the lower structure, which changed the break span of the lower structure. (3) “Simultaneous and nonsimultaneous structural failures” of the compound spatial structure were caused by the variation of the break span of the multilayered structure. (4) Based on the weighting characteristics, there were three stages during work face weighting, including a gradual pressure increase stage (Stage I), an accelerated pressure increase stage (Stage II), and a fast pressure increase stage (Stage III). (5) The mine pressure occurrence demonstrated a “small to medium and to large” feature. (6) Prefracturing techniques should be additionally incorporated to prevent simultaneous failure of the multilayered structure. Findings of the work can demonstrate the emergence of strong mine pressure in the Datong mining area and have theoretical significance and reference value for maintaining safe mining in similar conditions.