The main motivation for this paper is to discuss the development of a novel compact and light-weight dual-frequency, dual linearly polarized, high-efficiency, stacked-patch microstrip-array antenna for use in standalone aircraft-based remote sensing applications. Results from simulation, fabrication, and testing of a sixteen-element stacked-patch array antenna, optimized for an L-band frequency of operation, are presented. The design center frequencies were 1.26 GHz and 1.413 GHz with 10 MHz and 25 MHz bandwidths in each band, respectively. Due to the large number of design parameters and demanding design requirements of beam-efficiency, sidelobe levels, and polarization characteristics, particle-swarm optimization (PSO) and finite-difference time-domain (FDTD) simulations were used for synthesis and analysis. Cancellation techniques, based on symmetry, were applied to the antenna ports, with a custom-built feed network to reduce cross polarization. Simulations and measurement results from a spherical near-field test facility confirmed excellent performance of the array configuration, with a beam efficiency of greater than 90%, isolation better than -35 dB, and cross polarization in the main beam of the array better than -40 dB. From the sixteen-element array simulations and experimental verifications, one of the objectives of the present study is to suggest the possibility of using customized dual-frequency, dual-polarized arrays as potential feeds for reflectors to replace the traditionally used conical horns for future soil-moisture and sea-salinity missions
13 June 2016 in Journal of Engineering Materials and Technology
A relatively low-temperature carbon nanotube (CNT) synthesis technique, graphitic structure by design (GSD), was utilized to grow CNTs over glass fibers. Composite laminates based on the hybrid CNTs–glass fibers were fabricated and examined for their electromagnetic interfering (EMI) shielding effectiveness (SE), in-plane and out-of-plane electrical conductivities and mechanical properties. Despite degrading the strength and strain-to-failure, improvements in the elastic modulus, electrical conductivities, and EMI SE of the glass fiber reinforced polymer (GFRP) composites were observed.
27 March 2013 in Microwave and Optical Technology Letters
Omnidirectional antennas are widely used for mobile communications in the Base Transceiver Station (BTS). This letter introduces a high-gain coaxial collinear (CoCo) antenna with a stable radiation pattern. To design a wideband end-fed CoCo antenna, we modify the classic center-fed CoCo antenna structure with an appending wire-mesh structure. The proposed CoCo antenna's -10dB impedance bandwidth and gain bandwidth (1 dB variation of maximum gain vs. frequency) at a center frequency of 900 MHz is three times higher than the classical center-fed CoCo's equivalent bandwidth, thus retaining 9 dB gain. The unique feeding configuration is designed to create the broadband end-fed antenna and minimize the feeding cable effect on the omnidirectional radiation pattern. We prototype an antenna to evaluate the design performance and confirm the simulation results. The measured results show 8.5 dBi directivity and 125.5 MHz bandwidth at 900 MHz center frequency.