Department of Biomedical and Chemical Engineering, Syracuse University, 900 South Crouse Ave, 318 Bowne Hall, Syracuse, Syracuse, New York, 13244, United States
Auto-generated profile, based on publicly available information
Ameya Ravindra Narkar
Department of Biomedical and Chemical Engineering, Syracuse University, 900 South Crouse Ave, 318 Bowne Hall, Syracuse, Syracuse, New York, 13244, United States
Inspired by nature's ability to shape soft biological materials to exhibit a range of optical functionalities, we report femtosecond (fs) laser-induced densification as a new method to generate volume or subsurface diffractive gratings within ordinary hydrogel materials. We characterize the processing range in terms of fs laser power, speed, and penetration depths for achieving densification within poly(ethylene glycol) diacrylate (PEGDA) hydrogel and characterize the associated change in local refractive index (RI). The RI change facilitates the fabrication of custom volume gratings (parallel line, grid, square, and ring gratings) within PEGDA. To demonstrate this method's broad applicability, fs laser densification was used to generate line gratings within the phenylboronic acid (PBA) hydrogel, which is known to be responsive to changes in pH. In the future, this technique can be used to convert ordinary hydrogels into multicomponent biophotonic systems.
Despite technological advances, the fabrication of multiscale, multi-material, and topologically complex 3D structures using soft hydrogel biomaterials remains a challenge due to the inherent trade-offs between print size/resolution, biomaterial properties, and design complexity. In this work, we combine additive (macroscale) digital light projection (DLP) mode with subtractive (microscale) two-photon ablation (TPA) mode with multi-material exchange capability. We identify ideal hydrogel formulations that are compatible with both DLP and TPA modes of processing. Technical challenges related to multimodal fabrication such as alignment of multiscale topologies to facilitate seamless media perfusion, soft–hard multi-material printing to facilitate handling of mechanically weak hydrogel constructs, and hydrogel swelling during printing, were resolved. To highlight the novelty of this hybrid platform, we fabricated centimeter-scale hydrogel constructs with embedded microscale perfusable topologies that cannot be achieved by isolated use of either DLP or TPA modes. This includes simpler microfluidic chips with independently perfusable microchannels to more complex 3D constructs with embedded, multiscale fluidic circuits that mimic the alveoli-capillary interface, or microfluidic chips with endothelialized microchannels. The unique ability of this multimodal platform to mimic in vivo -like multiscale complexities is the first step towards the development of next-generation organ-on-chips.
Smart hydrogel adhesives with tunable properties consist of adhesive moieties in the polymer network that respond to external stimuli like pH, temperature, etc. Responsiveness of smart adhesives to pH, in particular, is important because of the simple actuation mechanism and the ability to achieve facile bonding and debonding upon command. Covalently crosslinked hydrogel adhesives were prepared by employing an N-HEAA (hydroxyethyl acrylamide) backbone embedded with dopamine methacrylamide (DMA), a marine mussel inspired adhesive protein and 3-acrylamido phenylboronic acid (AAPBA), to determine the effect of pH on the interfacial binding properties of the hydrogel adhesive with a borosilicate glass substrate. Swelling tests were performed to determine the response of the synthesized hydrogels to changes in pH values. These tests revealed that in a pH 3 buffered solution, hydrogels containing DMA and AAPBA showed a shrinking trend, while at pH 9, a swelling phenomenon was observed. The evidence from oscillatory rheometry tests exhibited elevated loss moduli (Gʹ) for hydrogels with DMA and AAPBA at pH 9, when compared to the relevant controls. In conjunction, the data from swelling tests and rheometry explained the unusual swelling of the hydrogels and formation of the catechol-boronate complex at pH 9, which caused more than an order of magnitude of increase in the Gʺ owing to the viscous dissipation of energy at that pH as compared to the control gels. The interfacial binding properties were tested by performing contact mechanics tests, in the presence of an acidic/basic medium. The maximum work of adhesion values of 0.59mJ/m2 were obtained for hydrogels with 2.5mol% DMA and 10mol%AAPBA in the polymer network, when tested against a borosilicate glass surface wetted with 250μL of the pH 3 solution. At pH 9, this value reduced to as much as 1/5th of its value at pH 3. Earlier works have proposed that the oxidation of the catecholic groups that are chiefly responsible for adhesion with an inorganic substrate, is a deterrent to the adhesive properties of a hydrogel. We have accomplished the development of a model adhesive system in which we utilized the pH responsiveness of the hydrogels to demonstrate the elevated and reduced works of adhesion at acidic and basic pHs respectively. We believe that the catechol- boronic acid complex at pH 9 will allow for the reversible DOPA- facilitated adhesion. Reversibility studies performed in this direction revealed that while the hydrogels could recover their shape in terms of the measured