The parallel mechanism with a reconfigurable platform retains all advantages of parallel mechanisms but provides additional functions due to the reconfigurable platform. However, it leads to kinematic coupling between limbs, that makes it difficult to analyze the mechanism with existing methods. This paper presents a new method to deal with kinematic coupling between limbs based on the transitivity of limb constraints and their relevance to the reconfigurable platform constraints. Setting up the geometric model of the mechanism and adopting the screw system theory to verify the relevance between limb constraint wrenches and platform constraint wrenches, the transitivity of limb constraints is revealed. The final resultant wrenches and twists of the end-effector are then obtained. Finally, the proposed method is extended to parallel mechanisms with planar n-bar reconfigurable platforms, spherical n-bar reconfigurable platforms and other spatial reconfigurable platforms.
The morphing wing can enable the aircraft to maintain good flight performance in different missions or flight stages, which has enjoyed much attention in recent research. However, it is difficult to design the wing with multiple configurations and lightweight. Inspired by the origami art, a reconfigurable mechanism with a single-degree-of-freedom (single-DOF) is introduced to the morphing wing design in this paper. The bending configuration, the deployable configuration, and the configuration transformation of the reconfigurable mechanism are respectively analyzed. The lengths of some links are also optimized according to the motion requirements. Specific kinematic pairs of the reconfigurable mechanism are required to have the locking function. Therefore, a reliable “plug-in” type lockable mechanism is designed and its working performance is verified by comparing the analytical model and the finite element method model. Finally, by assembling the reconfigurable mechanism with the ribs, the reconfigurable wing which can realize the arbitrary transformation of four configurations under a single drive mode can be obtained.