The asymmetric six-phase permanent magnet synchronous motor (AS-PMSM) can switch to five- or three-phase operation in the case of winding and drive leg fault. This article analyses the temperature distribution of the AS-PMSM with different fault-tolerant modes and provides theoretical support to improve the reliability of the machine and its drive system. A 22-pole 24-slot AS-PMSM with physical, magnetic, and thermal isolation is designed first. Then, the systematic analysis method, considering the inverter, the machine, and the control algorithm, is proposed. The magnetic field and losses of the AS-PMSM are addressed in multiple modes, including the six-phase, the five-phase minimum loss/maximum torque (ML/MT), and the three-phase operation. Furthermore, a 3-D model, bidirectionally coupling electromagnetic field and temperature, is established based on the theory of transient temperature field and fluid dynamics. The model reveals the temperature propagation law and the temperature variation of the AS-PMSM in four modes. The proposed theoretical analysis is finally proved effective by experiments.
25 February 2019 in IEEE Transactions on Energy Conversion
This paper proposes an analytical model to design and investigate the double-sided linear induction machine with a ladder-slot arrangement employed on the secondary mover. Emphasising the longitudinal end effect, the equivalent circuits are based on Duncan's model modified by electromagnetic field analysis. By defining the ratio of ladder width to slot width (the ladder-slot ratio) equivalent circuit parameters, including the magnetizing inductance and resistance, and the secondary resistance, are estimated using formulae linked to the dimensions and geometry of the primary and secondary. The analytical model is proven to be effective through measurements made on an experimental machine. Magnetizing inductance and resistance estimates are shown to be predicted accurately using the analytical method, and the analytical method further simplified for rapid and efficient practical design. The major contribution of this research is a practical method to optimize the design of large-scale drives using linear induction motors with a ladder-slot arrangement.
4 May 2021 in IEEE Transactions on Energy Conversion
This paper focuses on the transient modelling of a specific type of permanent magnet linear synchronous machine designed for line-start operation. The machine uses conductive ladders embedded in the mover to realise a permanent-magnet machine capable of line-start operation. Transient modelling of this type of machine under line-start conditions is critical to optimising machine design, and electrical and mechanical performance prediction, which leads us to devise a novel set of matrices of electrical parameters first. These matrices are developed considering both the impact of the conductive ladders and the longitudinal end effect based on electromagnetic field analysis. The model is then suitable for numerical computation in typical simulation environments. This yields a sufficiently accurate transient model that is verified by experimental results. Hence our novel model, that includes the longitudinal end effects and the effects of conductive ladders, is proven effective in predicting the line-start transients and associated electrical and mechanical performance. The novel model assists in the design optimisation stage where a compromise between synchronised performance and line-start operation is required. The novel machine type can then be investigated as a competitive candidate topology in various applications including electromagnetic launch.
16 June 2022 in IEEE Transactions on Industry Applications
This article investigates the longitudinal end effect of the line-start permanent magnet linear synchronous motor (line-start PMLSM), where conductive ladder rungs embedded into the mover enhances line-start capability but induces the longitudinal end effect due to the eddy current. The longitudinal end effect is first analyzed by virtue of analytical solutions of the electromagnetic field. Then, the coefficient of longitudinal end effect is presented in a piecewise format for convenient application. An algorithm is proposed based on the simplified piecewise theory to evaluate transient responses of the line-start PMLSM. To validate the feasibility of the proposed simplified piecewise theory, cases of the line-start PMLSM are investigated, with which a prototype is manufactured and the theoretical method is proven effective and accurate by experiments. Feasible principles involving the transient characteristics are also investigated via the design cases and experiments. The major contribution of this research is a feasible and convenient method to analyze the transient responses during the line-start process.
Introduction: The accumulation of amyloid-β peptide (Aβ) decreases cerebral blood flow in elderly people with Alzheimer’s disease (AD) and is believed to be the initiator of this disorder. As a traditional Chinese medicine, Yangxue Qingnao (YXQN) improves cerebral insufficiency and attenuates cognitive impairment, showing potential against AD. But whether YXQN has the ability to block Aβ self-aggregation is rarely reported. Objectives: Here, we investigate the effects of YXQN on Aβ accumulation and its mediated cytotoxicity using a range of biochemical, biophysical, and cell-based approaches. Methods: Thioflavin T assay, transmission electron microscope, and 1H NMR experiments were used to investigate the effects of YXQN on Aβ fibrogenesis and aggregation. Far-UV CD spectra were acquired to assess the alteration of YXQN on the conformation of the amyloid protein. Three short Aβ42 peptides (AA 1-16, AA 17-33 and AA 28-42) were designed to analyse the Aβ42 epitope to which YXQN components bind. The effect of YXQN on Aβ-induced cytotoxicity was investigated through SH-SY5Y cell viability assay. Results: We provide evidence showing that YXQN clearly reduces Aβ42 fibrillogenesis and alters its β-sheet conformation, indicating the inhibition of primary nucleation of amyloid protein. Using the different Aβ short peptides, residues 17-33 were identified as the target epitope for YXNQ components interacting with Aβ42. Furthermore, in the SH-SY5Y cell injury model, our data show that high-dose YXQN attenuates amyloid-induced cytotoxicity approximately 60% and effectively ameliorates cell distortion in morphology. Conclusion: Based on these results, YXQN exerts a neuroprotective effect by inhibiting Aβ42 toxic aggregation, which has the potential to combat AD.
29 April 2026 in IEEE Transactions on Transportation Electrification
In permanent magnet synchronous motors (PMSMs) with hairpin windings for electric vehicles, conductors in the stator slot-opening region experience high loss and high temperature, which significantly degrade the motor performance in complex operating conditions and endanger the life of the insulation. To address this issue, this work proposes a two-stage optimization design method for the conductor layer number and cross-sectional parameters to suppress the hotspot temperature of in-slot conductors. Taking a PMSM with a speed range of 0–18000 rpm as an example, a bidirectional electromagnetic-thermal network coupling calculation model was established. On this basis, the effect of the number of conductor layers on copper loss and hotspot temperature was investigated. Then, a winding structure was proposed to suppress the temperature of top-turn conductors, where the two conductor layers in the slot opening area have different cross-sectional areas from the remainder. The effects of the variations in the width and height of the two conductor layers in the slot opening area on the winding loss and temperature at different speeds were analyzed. Accordingly, a two-stage optimization design method was proposed to integrate the number of conductor layers and cross-sectional parameters of the two slot-opening conductor layers, which considered the conductor hotspot temperature. The accuracy of the established models and calculation results was verified in prototype experiments, which provides a theoretical basis for the hairpin winding design and temperature rise suppression.