17 July 2020 in IEEE Transactions on Smart Grid
ECEduardo Castillo-Guerra
Thermostatically controlled loads (TCLs) are good candidates for direct load control (DLC). They can be aggregated to join the electricity market through a centralized management performed by virtual power plant (VPP). However, there are two main concerns that arise when TCLs participate in DLC. The first is related to the dispatchability of VPP against normal energy demand of individual TCLs in uncertain time-variant environments. The second refers to the tremendous increase of communication and computational requirements needed to perform DLC on a large population of TCLs. This paper introduces aggregators between the DLC controller and TCLs with a novel robust control mechanism to reconcile these concerns. The control mechanism is implemented with two layers: the upper layer suppresses the control payback effect with a quadratic optimization model, and the lower layer addresses the power trajectory tracking with a novel payback tracking error model (PTEM). The control method needs minimum sensing infrastructure since it requires power data only at the aggregation level. Our simulations resulted in a robust reference power tracking by the aggregator with a percentage root mean squared error between 3.33% -5.69% under uncertain time-variant environments. The continuous responsiveness indicates that the aggregators manage to convert the aggregated TCLs into “manageable resources” that ensure the dispatchability of VPP.
23 August 2023 in Applied Energy
19 August 2018 in IEEE Transactions on Industrial Informatics
As the problem of three-phase unbalance in a distribution network with distributed generations (DGs) is prominent, a multiobjective dynamic reconfiguration method for three-phase balance is proposed to make reconfiguration more reasonable and effective. Based on three-phase power flow calculation and reconfiguration process analysis of distribution networks with DGs, a new reconfiguration model with comprehensive optimization objectives of minimizing three-phase unbalance factor and number of switching times are established. A network connectivity discrimination method based on the algebraic connectivity of graph theory is adopted to quickly remove infeasible solutions, and a new multiobjective molecular differential evolution algorithm is designed to improve optimization depth and avoid prematurity in the optimization process, which is based on the principle of closer molecules with greater intermolecular repulsion. The multiobjective optimal dynamic reconfiguration of a modified IEEE 34-bus test feeder with DGs is carried out and the simulation results demonstrate the effectiveness and superiority of the proposed method.
20 August 2019 in IEEE Transactions on Industry Applications
Domestic Electric Water Heaters (DEWHs) can provide operational flexibility for load control due to their energy storage capacity. Load forecasting for aggregated DEWHs is important for providing information of baseline load and controlling electricity demand profile without negative impact to the normal end use. Advanced Metering Infrastructures (AMI) nowadays provide more possibilities to further enhance forecasting with bottom-up method. This paper proposes a bottom-up forecasting with Markov-based error reduction method to predict power consumption of aggregated DEWHs for multiple forecast horizons. DEWHs are randomly divided into small aggregations, whose power consumption is forecasted by independent forecast engines. In this paper, the engines are K-means and wavelet decomposition-based neural networks (KWNN). After summing all forecasting of small aggregations up, a new Markov-based error reduction method is proposed to extract features in residuals and mitigate forecasting error accumulation introduced by the summation, providing opportunities to further improve forecasting accuracy for the total DEWH load. Differing from traditional Markov-based error reduction, two new compensation parameters (Compensation Coefficient, and Compensation Threshold) are proposed. They are determined by using Particle Swarm Optimization (PSO) algorithm. Experiments on real and simulated DEWH loads verified the effectiveness of the proposed forecasting method. The proposed method improved the forecast accuracy over selected benchmark algorithms by about 20% to 80%, according to four performance metrics: MAE, MAPE, RMSE, NRMSE. The aggregation effects on performance were also analyzed in theory and tested with simulated DEWHs, providing a good indication of the forecast dependence on the aggregation size.
12 July 2022 in IEEE Transactions on Smart Grid
Low inertia, nonlinearity and a high level of uncertainty (varying topologies and operating conditions) pose challenges to microgrid (MG) systemwide operation. This paper proposes an online adaptive Koopman operator optimal control (AKOOC) method for MG secondary voltage and frequency control. Unlike typical data-driven methods that are data-hungry and lack guaranteed stability, the proposed AKOOC requires no warm-up training yet with guaranteed bounded-input-bounded-output (BIBO) stability and even asymptotical stability under some mild conditions. The proposed AKOOC is developed based on an ensemble Koopman state space modeling with full basis functions that combines both linear and nonlinear bases without the need of event detection or switching. An iterative learning method is also developed to exploit model parameters, ensuring the effectiveness and the adaptiveness of the designed control. Simulation studies in the 4-bus (with detailed inner-loop control) MG system and the 34-bus MG system showed improved modeling accuracy and control, verifying the effectiveness of the proposed method subject to various changes of operating conditions even with time delay, measurement noise, and missing measurements.