24 June 2023 in Chinese Journal of Aeronautics
3 August 2017 in International Journal of RF and Microwave Computer-Aided Engineering
1 October 2020 in International Journal of RF and Microwave Computer-Aided Engineering
A novel quasi symmetrical three-way Gysel power divider with frequency-independent isolation and impedance matching is proposed. Equal magnitudes of the reflection coefficients for the input and the output ports of the three-way divider can be obtained despite the asymmetrical structure and the different terminal impedances. The divider is analyzed in terms of its equivalent four-port network. Quasi symmetrical property (|S-11| = |S-ii|, i = 2-4) is proved which means the input port (port. 1) will automatch when the output ports are matched. Closed-form equations are derived for the design. For verification, based on the microstrip/slotline PI, two examples, which include a three-way Gysel PD with port impedances (50, 50, 50, 50) omega, and an ultra-wideband three way Gysel PD with port impedances (50, 100, 100, 100) omega with the center frequency of 4 GHZ are designed, fabricated, and measured respectively. The measured results are in great agreement with the simulated ones.
18 August 2020 in International Journal of RF and Microwave Computer-Aided Engineering
A novel method for designing a multiband rat‐race ring coupler based on a notch filter is proposed. This method realizes dual‐, tri‐, quad‐, penta‐, … band characterizes of coupler using the same structure, two additional branches. So, it has three advantages: (a) simple structure even the number of working bands more than four; (b) achieving the different numbers of working bands with just one structure; (c) useful for almost any kind of wideband passive components because it views them as black boxes. Three prototypes, a tri‐band ring coupler (Global System for Mobile Communications 0.9 GHz, Digital Communication System 1.8 GHz, Industrial Scientific Medical 2.45 GHz), a quad‐band ring coupler (Time Division Long‐Term Evolution 2.3 GHz, Satellite C‐Band Downlink 3.8 GHz, Aeronautical Radio Navigation 4.3 GHz, and Satellite C‐Band Uplink Applications 6.3 GHz) and a penta‐band ring coupler (Frequency Division Long‐Term Evolution [LTE‐FDD] 0.9, 1.4, 1.8, 2.3, and 2.6 GHz), are simulated and measured. They all use the same structure but different parameters of the added branch. The results validate the functionality of the coupler. The method of designing multiband devices in this study can be used for other passive devices, and the structure is simple.
13 December 2017 in International Journal of RF and Microwave Computer-Aided Engineering