29 March 2024 in Engineering Technologies and Systems
When growing tall-growth crops (cereal crops in late the phases of development, corn, sunflower, etc.), there are used boom sprayers equipped with twin-fluid spray cones with fixed angles of inclination to the vertical of the spray cones. The working fluid is applied with such sprays are more intensively on the front side of the plant leaves while the intensity of covering the plants from the back side with the working fluid decreases. The development of the spray system will allow improving the quality of crop treatment with boom sprayers.
1 January 2024 in ARCHIVES OF ENGINEERING KNOWLEDGE
This study explores the optimization of service inspection at the Hyundai Premium Service Center in Astana, focusing on enhancing operational efficiency and profitability. Utilizing statistical analyses and operational data from November 2024, the research examines the relationship between service requests and revenue generation. Simulations with service requests ranging from 1,000 to 6,000 reveal a consistent increase in revenue, with a stabilization at approximately 254 million Tenge for six service posts when requests exceed 3,000. The highest revenue peak of 530 million Tenge is achieved with eight service posts servicing 6,000 requests, highlighting the importance of optimizing service post allocation. Analysis identifies the optimal configuration for maximizing profits as six service posts with 15 workers, resulting in a profit of 522 million Tenge. This underscores the necessity of balancing service post numbers and workforce levels to fully utilize operational capacity, enhancing financial outcomes. Key findings include the identification of inefficiencies during high-demand periods and the critical need for strategic resource allocation. The study emphasizes the value of effective operational management and planning in improving service center performance, customer satisfaction, and maintaining a competitive advantage in the automotive market.
2 October 2026 in Engineering, Technology & Applied Science Research
In the arid regions of Kazakhstan, agricultural crops are grown on low-productivity saline-alkali soils with varying properties across different horizons. Soil tillage is performed using non-plow implements that generate high traction resistance and turn over large clods of soil with a low degree of fragmentation. The aim of this study is to provide technical support for primary tillage to maximize soil moisture accumulation and humus conservation. The problem is solved by the layer-by-layer loosening of the plow layer with maximum preservation of the humus horizon and stubble on the field surface to accumulate soil moisture and prevent soil erosion. This operation is effectively performed by a combined loosener consisting of a flat-cutting tine with vertical knives and a rotary tiller blade. The plowshare cuts through the salt-affected horizon, partially crumbling its lower part, while the upper part is broken up by the vertical knives. The partially deformed upper humus layer prevents the infertile soil layer from being moved to the field surface and is loosened with minimal energy expenditure. Mathematical models of the process of saline soil horizon loosening were developed, and the parameters and operating modes of the loosening tine with vertical knives were substantiated. A loosener with vertical blades in the plow layer improves the soil’s water and air conditions for plant root development, creating a total porosity of 55.7%- 56.6% and a degree of crumbling 7–8% higher compared to standard machines. The oat and barley yields under the layer-by-layer tillage treatment were higher than those under surface tillage and moldboard plowing by 6.0–9.2 с/ha and 6.1–11.8 с/ha, respectively.
30 September 2025 in Ġylym ža̋ne bìlìm
SUSeifullin Kazakh Agro Technical Research University»
Seifullin Kazakh Agro Technical Research University»
+1
Precision seeders require accurate real-time speed acquisition to optimize seeding uniformity and resource efficiency, yet existing systems often face complexity, cost, and performance limitations under dynamic field conditions. This study presents a low-cost, embedded solution for rotational speed monitoring using an incremental rotary encoder (HDE38S6-600-N-12-24, 600 PPR) interfaced with an ESP32 microcontroller and a TowerPro SG-90 servo motor, to capture wheel rotation in real time. The firmware uses interrupt-driven pulse counting to calculate rotational speed, and the system was bench-tested using a representative motor setup before integration with a multi-row precision seeder. Experimental evaluation demonstrated that the prototype could reliably monitor rotational speed and output live velocity data via a serial interface. The measured trends closely followed commanded speed changes, confirming the effectiveness of the encoder-based approach. This low-cost, open-platform solution offers a robust and adaptable means of speed sensing for precision seeding, enabling potential closed-loop control of seed metering. The design and successful testing highlight its applicability to modern agricultural equipment, where precise speed feedback can improve planting uniformity and efficiency.