Melanoma is acknowledged as the most dangerous form of skin cancer, accounting for 90% of the deaths associated with cutaneous cancers.1 According to a recent report,1 the incidence of melanoma is increasing worldwide with the regional incidence rate of up to 10 to 20, 20 to 30, and 50 to 60 per 100,000 populations in Europe, USA, and Australia, respectively. The standard treatment of an operable melanoma involves surgical excision with a safety margin. The safety margin is required in order to completely remove not only the primary cancer but also melanoma cells that might have spread into the surrounding skin.2 The determination of a proper safety margin is critical during surgical treatment because a too-large safety margin leaves functionally and cosmetically poor outcome, whereas a too-small safety margin risks incomplete removal of cancer or cancer cells. For the determination of safety margin, Mohs micrographic surgery is widely adopted in dermatology, in which the process of cancer excision and histologic examination is repeated until no cancer cells are found from the excised layer.3 An accurate interpretation of the histologic examination of excised layer during the surgery is critical. One of the shortcomings of the Mohs procedure is the prolonged operation time due to repeated histology test during the surgery, which increases the risk of complications such as wound infection.4 Thus an alternative or supporting technique to accurately and rapidly determine the cancer region and appropriate safety margin is highly desired.
This work reports that the intensity ratio of spectral lines having similar self-absorption characteristics during laser induced breakdown spectroscopy (LIBS) analysis can become nearly constant over a wide range of irradiation conditions if the intensities are integrated over a sufficiently long time. It is shown that the plasma temperature and intensity ratio of these spectral lines have temporal similarity. The spectral lines with similar self-absorption properties may be selected to improve the accuracy and consistency of LIBS analysis results under an environment with fluctuating measurement conditions.