Photonic beamforming networks are promising candidates to achieve power-efficient transmission in future cellular communication systems. However, sensitivity to process and temperature variations necessitates an automatic calibration solution to enable robust operation. This paper demonstrates fully automatic monitor-based tuning of an integrated optical ring resonator-based 1X4 asymmetric binary tree optical beamforming network (OBFN). The proposed monitor-based tuning algorithm compensates fabrication variations and thermal crosstalk by controlling micro-heaters individually using information from electrical monitors. This algorithm is demonstrated on an OBFN that operates at 30 GHz with 2 GHz bandwidth and is fabricated in a standard silicon photonics foundry process. Successful calibration of the OBFN from a severely degraded initial response to the well-defined group delay responses required for a targeted radiating angle over 60 $^{\circ }$ (−30 $^{\circ }$ to 30 $^{\circ }$ ) in a linear beamforming antenna array is achieved. This fully automatic tuning approach opens the possibility of employing silicon OBFNs in real wideband mm-wave wireless communication systems.
23 January 2018 in Journal of Lightwave Technology
Reconfigurable photonic filters are promising candidates to meet the requirements of future microwave communication systems. However, sensitivity to process and temperature variations necessitates an automatic calibration solution to enable robust operation. This paper demonstrates fully automatic tuning of silicon photonic all-pass filter (APF)-based pole/zero filters using a monitor-based tuning method that calibrates the initial response by controlling each pole and zero individually via microheaters. The proposed tuning approach calibrates severely degraded initial responses to the designed elliptic filter shapes and allows us for automatic bandwidth and center-frequency reconfiguration of these filters. This algorithm is demonstrated on second- and fourth-order filters fabricated in a standard silicon photonics foundry process. After the initial calibration, only 300 ms is required to reconfigure a filter to a different center frequency. Thermal crosstalk between the microheaters is investigated, with substrate thinning demonstrated to suppress this effect and reduce filter calibration to less than half of the original thick substrate times. This fully automatic tuning approach opens the possibility of employing silicon photonic filters in real communication systems.
Automatic group delay tuning of a lX4 RF Si-photonic asymmetric binary tree beamforming network structure is achieved with ring resonator drop port photodetectors providing electrical monitor information. The proposed tuning approach calibrates the group delay of an entire optical beamforming network (OBFN) that operates at 30GHz with 2GHz bandwidth. Compensation of process variations and thermal crosstalk is achieved with the 4 calibrated optical outputs displaying equal 41ps delay intervals.
RF photonic filters are capable of achieving very high selectivity and dynamic tuning over multi-GHz ranges. This paper presents a mm-wave silicon photonic fourth-order tunable elliptic digital filter designed in the optical domain with ring-resonator-based all-pass filter (APF) unit cells. Inclusion of tunable phase shifters and Mach-Zehnder interferometer (MZI) couplers in the filter's rings and front-end provides comprehensive tuning to compensate for variations in ring resonance frequency, coupling ratio, and phase mismatches. A monitor-based adaptive tuning algorithm is proposed to calibrate the optical filter response with high accuracy.
We demonstrate a reconfigurable Si-photonic fourth-order all-pass filter-based topology to synthesize Butterworth, Chebyshev, and elliptic filter responses. Ring resonator drop port photodetectors provide electrical monitor information to tune the location of both the poles and zeros to dynamically set the desired filter configuration.