14 January 2024 in Reliability Engineering & System Safety
23 December 2019 in Protection and Control of Modern Power Systems
Power distribution systems are profoundly inclined to disturbances like untimely switching of breakers & relays, sympathetic tripping, and uncertainties regarding fault location. Thus, system stability and reliability are greatly affected. In this way, situational awareness and system integrity are the crucial factors in developing power system security, as it empowers successful decision making & timely reaction by the operators to any disturbance and also maintaining continuity of power supply. This paper focuses on the enhancement of situational awareness by fault location through fault passage indicators (FPI) to improve nominal impedance-based methods in distribution networks. Also, the proposed method is validated by comparing it with Intelligent Electronic Device (IED) based fault location method. Further, simultaneous reconfiguration of the system is incorporated to maintain the continuity of supply. The analysis has been tested on IEEE 33 bus distribution system.
11 March 2024 in Iranian Journal of Science and Technology, Transactions of Electrical Engineering
1 February 2024 in Journal of Electrical and Computer Engineering
Unpredictable variations in load demand and unanticipated component failures are progressively impacting the operation of modern power systems, making system evaluation more stochastic in nature. Although deterministic approaches were formerly the norm for determining system status, probabilistic approaches have greatly improved the capacity to capture the stochastic behavior characteristic of power system operations. The presented work in the paper recommends the use of probabilistic modelling approaches with deterministic approaches, highlighting their crucial function in augmenting the reliability and security of contemporary power systems to unanticipated failures. In this paper, N1 security criteria based reliability of the composite power system (CPS) is proposed using an integrated deterministic and probabilistic framework (D-P) considering outage of the transmission line. For the deterministic approach (DA), line overloading on available lines is determined using the static security index (SSI). For the probabilistic approach (PA), reliability indices such as expected loss of power (ELOP), expected frequency of contingency (EFOC), expected loss of load (ELOL), probability of load curtailment (PLC), and expected duration of load curtailments (EDLC) are calculated. Further, for each contingency, a performance index is determined using both approaches to assess the severity of the contingency that occurred on the power system. Based on the N1 security criteria based reliability analysis using an integrated D-P framework, a credible critical set of transmission lines is obtained, which can serve as important information to system operators. The proposed techniques have been tested on IEEE 24 bus reliability test system (RTS).
1 January 2025 in International Transactions on Electrical Energy Systems
Line failures, particularly in the form of N ‐1 contingencies, are a significant cause of interruptions in power grids, negatively affecting system reliability. Effective risk‐based contingency analysis (RBCA) is essential in modern power systems to address increasing uncertainties and complexities. This paper proposes an RBCA framework that calculates the probabilistic risk index (RI) based on transmission line severity functions for single‐ and multiarea bulk power systems. The approach identifies critical transmission lines and least reliable buses, enabling utilization of load curtailment strategies. Meta‐heuristic techniques, particle swarm optimization (PSO), and gray wolf optimization (GWO), are employed for optimal load curtailment, achieving approximately 30% reduction in curtailed load compared to the analytical proportional load curtailment approach. The methods chosen for their robustness and ability to balance exploration and exploitation in various optimization problems provide practical insights for system operators to enhance reliability under diverse operating conditions. Furthermore, the study examines the impact of flexible thermal rating (FTR) on multiarea systems considering variations in weather conditions, and a comparison is drawn with the static thermal rating (STR) system. Key reliability indices, including EENS, EDNS, BPECI, MBPCI, and EIC , are determined and analyzed for the proposed study. The proposed approach benefits system operators in preventing outages and formulating contingency action plans and emphasizes the study’s contribution to ensuring a stable and reliable power supply which is critical for modern societal needs. The proposed approach has been tested and validated on IEEE 24 reliability test system (RTS).