17 January 2020 in IEEE Transactions on Instrumentation and Measurement
Microwave humidity and temperature sounder (MWHTS) is an important payload of FENGYUN-3D (FY-3D) satellite. MWHTS is designed as total power radiometer because of its high radiometric resolution (NEDT) and simple configuration. NEDT is one of the most important indicators for MWHTS. However, the traditional NEDT analysis results have a large error compared with the measured results. To estimate the overall radiometer performance, this paper presents a numerical system simulation model that can be used to estimate NEDT. The model considers two of three main components that degrade the NEDT: thermal noise and calibration error. The third components 1/f noise is calculated by analyzing the power spectrum of the actual output voltage. Based on digital signal processing, this paper presents a method for accurate system modeling, including radiation source modeling, frontend modeling and backend modeling. The simulation model is validated by comparing the dynamic range, linearity and standard deviation of output signals of simulation system and actual instrument. In this paper, the model has been applied to NEDT estimate of 15 MWHTS channels operating from 89 GHz to 183 GHz. The comparison of estimate results between simulation model and actual instrument shows they are in good agreement and the maximum error is no more than 18%.