5 December 2023 in IEEE Transactions on Power Electronics
It is significant to study power device package fatigue failure as it seriously affects the reliability of power system. Nevertheless, the research of power device failure process is insufficient. In this paper, an accurate and intelligent approach is proposed to predict the power device fatigue failure process with multiple fatigue sampling method (MFSM) and minimal component unit method (MCUM). MFSM is proposed to accurately build the power device lifetime model. It is accomplished through multiple sampling fatigue morphology evolution process of solder layers combined with the fatigue parameter. Morphology evolution is detected by scanning acoustic microscope (SAM) technology under accelerated lifetime test (ALT). The fatigue parameter is got through finite element analysis (FEA) by establishing each sampling geometry model. Then, the lifetime model is determined by their same failure area fraction ( F s ). In particular, digital image processing (DIP) is applied to detailly describe solder layer shapes which is also the key to building a real FEA geometry model. MCUM is utilized to complete the prediction of failure process, where solder layers are divided into minimal units and the FEA solution and location information of each unit are known. Based on lifetime model, the failure area can be got and the fatigue failure process can be finished intelligently by cosimulation. The proposed method is accurate and intelligent enough in predicting the failure of solder layers which is more helpful for planned device management.
23 April 2024 in IEEE Transactions on Power Electronics
The safe operation and lifetime of the power module are heavily dependent on the temperature distribution, making it imperative to optimize the thermal performance of the layout at the design stage. During the module design phase, a significant number of layouts are assessed. It is important to constrain computational complexity while achieving high accuracy. Mechanistic modeling and data-driven modeling have limitations in terms of complexity and generalizability respectively. Therefore, this article proposes a hybrid data-driven and mechanistic modeling approach. This approach incorporates the theoretical analysis of mechanistic modeling and the high efficiency of data-driven modeling to accurately and efficiently compute the temperature distribution of a given layout. This approach initially acquires the dataset from simple structures and conducts a dimensionality reduction to obtain the isothermal point set (IPS). Later, IPS of complex structures is developed based on mechanistic modeling. Finally, the IPS is converted to a field to obtain a temperature distribution of the given layout. The accuracy of the approach is verified by a steady-state thermal experiment. With the proposed approach, an accurate assessment of surface thermal distribution of different layouts can be quickly finished. The thermal characteristics evaluation efficiency can be improved roughly 300 times, which provides the necessary technical basis for layout optimization.
27 November 2024 in IEEE Transactions on Power Electronics
Package degradation for high power insulated gate bipolar transistors (IGBTs) modules would seriously affect the operation safety of power electronic converters. Due to the variety of degradation modes, state-of-the-art monitoring methods still struggle to comprehensively evaluate the health status of the module. Therefore, this article aims to propose a novel condition monitoring method for full modes of package degradation in high power IGBT modules. The hysteresis curve of forward voltage drop was found for the first time to contain the critical information to separate the different degradation mechanisms. The corresponding monitoring circuit and diagnostic process were also proposed and further carried on an inverter prototype with 150 A peak current. The experiment results show that the different degradation modes, i.e., bond wires lift off, solder fatigue, and thermal grease aging for IGBT modules can be effectively identified by the hysteresis curve. This method is expected to reduce the difficulty of converter maintenance in field application, as it is possible to accurately distinguish whether the degradation is internal or external to the IGBT module.
3 December 2025 in IEEE Transactions on Power Electronics
Junction temperature is a crucial parameter for monitoring SiC power modules. However, the existing noninvasive junction temperature estimation methods still exhibit certain deficiencies in accuracy and resolution limited by the handling of multichip thermal cross-coupling and actual operating conditions. Therefore, this article proposes a novel artificial intelligence-enabled method to realize junction temperature estimation for multichip SiC power modules. The proposed approach is fully noninvasive and leverages the temperature profile of the built-in negative temperature coefficient (NTC) thermistor to decouple the effects of complex power losses and cooling conditions. A hybrid neural network model (HNNM) integrating both data-driven and physical information is developed to reconstruct the thermal field of the module. The mapping relationship between the NTC temperature profile and the module thermal field is analyzed, enabling the decoupling of operating condition parameters over a specified range. The HNNM with good generalization capability and noise robustness is constructed and tuned. The resolution and accuracy of the proposed estimation method are verified by finite element simulation and experiment. The contribution of this article is to provide an accurate, noninvasive, easy-to-implement and generalized junction temperature monitoring scheme for multichip SiC power modules under complex operating conditions.
17 February 2026 in IEEE Journal of Emerging and Selected Topics in Power Electronics
The pursuit of higher temperatures, frequencies, and power densities in power converters has significantly elevated the performance demands on power modules. Existing designs struggle to support SiC MOSFETs operating at extremely high temperatures beyond 300°C. To overcome these limitations, this study presents a SiC MOSFET power module utilizing a compact spatially symmetric double-sided embedded (CSS-DSE) packaging method. This packaging method significantly extends the maximum operating temperature limit by employing a high-temperature packaging material system with high-temperature resistance, high thermal conductivity, and well-matched coefficients of thermal expansion (CTE), as well as integrating key technologies such as an integrated terminal structure, planar interconnections that replace wire bonds, and an optimized nano-silver sintering process. Furthermore, the module’s overall electro-thermal performance is comprehensively enhanced by a compact planar interconnect structure, a multi-plane electromagnetic cancellation design, the proximity placement of decoupling capacitors, Kelvin source connections, optimized thermal paths, and a symmetric electro-thermal path design. Static and switching characteristics of SiC MOSFETs were evaluated using the fabricated module over an extended temperature range of 25°C to 500°C, providing insight into the underlying physical mechanisms governing their temperature-dependent behavior. Finally, a heatsink-free power converter based on the fabricated module was successfully operated with a junction temperature of 508°C. Experimental results validate the module’s high-temperature performance, enabling a significantly extended practical operating temperature range for SiC MOSFETs.