13 January 2015 in IEEE Transactions on Antennas and Propagation
A reflectarray antenna with improved performance is proposed to operate in dual-polarization and transmit-receive frequencies in Ku-band for broadcast satellite applications. The reflectarray element contains two orthogonal sets of four coplanar parallel dipoles printed on two surfaces, each set combining lateral and broadside coupling. A 40-cm prototype has been designed, manufactured, and tested. The lengths of the coupled dipoles in the reflectarray cells have been optimized to produce a collimated beam in dual polarization in the transmit and receive bands. The measured radiation patterns confirm the high performance of the antenna in terms of bandwidth (27%), low losses, and low levels of cross polarization. Some preliminary simulations at 11.95 GHz for a 1.2-m antenna with South American coverage are presented to show the potential of the proposed antenna for spaceborne antennas in Ku-band.
1 April 1999 in IEEE Transactions on Microwave Theory and Techniques
29 April 2013 in IEEE Microwave and Wireless Components Letters
A self-complementary metasurface is studied in this paper. The metasurface is a 2-D periodical arrangement of unit cells formed by a metallic printed split ring resonator and its complementary counterpart. It is demonstrated that this structure behaves like a very selective band-pass filter for a certain linear polarization while band-stop filtering is achieved for the orthogonal polarization over the same frequency range. This idea opens the door to a new class of frequency selective surfaces made of connected and unconnected elements, whose filtering properties are mechanically tunable from band-pass to band-stop by rotating the surface or the polarization.
29 December 2014 in IEEE Transactions on Antennas and Propagation
JGJose Luis Gomez-Tornero
A novel non-uniform sinusoidally modulated half-mode microstrip structure with application to near-field focused leaky-wave radiation in the backward Fresnel zone is proposed. First, it is presented a dispersion analysis of the constituent backward leaky wave in the sinusoidally modulated unit cell in half-width microstrip technology. This information is then used to design a finite non-uniform line that focuses the radiated fields at the desired point. Finally, eight similar line sources are arranged in a radial array to generate a three-dimensional focused spot located at the desired focal length over the simple central coaxial feeding. Simulated and experimental results are presented to validate the proposed simple approach.
7 August 2013 in IEEE Microwave and Wireless Components Letters
Two frequency selective surfaces (FSSs) made of an infinite set of parallel 1-D chains of interconnected split ring resonators (I-SRRs) and interconnected complementary split ring resonators (I-CSRRs) are studied. The main result was that the central frequencies of the stopband and passband can be strongly tuned by controlling the angle of incidence.
29 March 2017 in IEEE Transactions on Antennas and Propagation
A reflectarray antenna capable of operating independently in the transmit frequencies (from a satellite) in Ku-band (11-13 GHz) and Ka-band (19-20 GHz) has been proposed and demonstrated. To prove that independent beams can be optimized in each frequency band using separate feeds, a 25-cm demonstrator that generates a focused beam in dual polarization (linear or circular) has been designed, manufactured, and tested. The reflectarray cells comprise two stacked sets of coupled parallel dipoles for each polarization, which permits an independent optimization of the phase for each frequency and polarization. The simulated and measured radiation patterns for both copolar and cross-polar components are in good agreement in Ku- and Ka-bands.