1 September 2026 in Smart Materials and Structures
The L6 0 tetragonal nanoprecipitate phase is crucial for the simultaneous optimization of high magnetostriction and damping in Fe–Ga alloys. However, their widespread industrial application is limited by the high cost of Ga. The fundamental mechanisms governing magnetostriction and damping in the more economical ternary Fe–Ga–Al system, where Al partially substitutes for Ga, remain incompletely understood. This study investigates a -oriented Fe 83 Ga 14 Al 3 alloy, systematically examining the evolution of its phase structure and functional properties through controlled heat treatments. The directionally solidified state consists of A2, L6 0 , and D0 19 phases, exhibiting a saturation magnetostriction ( λ s ) of 53 × 10 −6 and a total damping capacity of 0.039. Quenching from 730 °C eliminates the D0 19 phase, resulting in a dual-phase A2 + L6 0 microstructure. This treatment increases λ s to 212 × 10 −6 and raises damping to 0.064. Subsequent aging reduces residual stresses, further enhancing total damping to 0.068 while maintaining a high λ s of 198 × 10 −6 . The observed magneto-mechanical hysteresis damping is well described by the Smith–Birchak model. The role of the L6 0 phase in the ternary alloy parallels that in its binary counterpart: it induces a tetragonal lattice distortion in the matrix and reduces magnetocrystalline anisotropy, enabling the synergistic enhancement of both magnetostriction and damping. These findings provide a theoretical foundation for designing cost-effective, high-performance Fe–Ga-based functional devices.