6 July 2022 in RSC Advances
Antibiotic-related environmental contamination directly threatens ecosystems and human health. Adsorption is an efficient and simple treatment process for removing antibiotics from water environments. Attapulgite (ATP) is a natural clay mineral extensively researched as a promising adsorbent material in the food industry, pharmaceutical sanitation, and organic wastewater treatment. Graphene oxide (GO) is widely employed in the treatment of organic wastewater due to its superior physicochemical properties. Here, using high temperature and HCl, ATP was activated (a-ATP), and a GO/a-ATP composite was prepared via hydrothermal synthesis. Using an adsorbent dosage of 0.75 g L−1, pH = 5, reaction time of 120 min, initial temperature = 35 °C, and initial TC concentration of 50 mg L−1, the adsorption capacity of GO/a-ATP for TC was 38.8 mg g−1. The pseudo-first-order model (PFO) and pseudo-second-order (PSO) model were fitted to the kinetic data, and yielded an R2-value of PSO (0.99991) > PFO (0.9389), indicating that the adsorption process is related to chemisorption. Adsorption was also well described by the mixed-order (MO) model (R2 = 0.9827), demonstrating that two rate-limiting adsorption reaction steps, diffusion and adsorption, occur; the former exerting greater influence. Equilibrium data was fitted to Langmuir, Freundlich, and Temkin isotherm models; the Langmuir model gave the best fit, suggesting the adsorption process is a homogeneous and monolayer adsorption process. Various thermodynamic parameters such as standard Gibbs free energy (ΔG0) and standard enthalpy (ΔH0) were also calculated, these results indicate the adsorption reaction is an endothermic process. Our study shows that GO/a-ATP is a promising adsorbent material for use in the adsorption of tetracycline in aquatic environments.
31 July 2026 in Journal of Environmental Chemical Engineering
27 July 2026 in SSRN Electronic Journal
Photocatalytic selective delithiation offers a mild route for separating Li from the Fe/P framework in spent lithium iron phosphate (LiFePO4, LFP). However, rational criteria for identifying high-performance photocatalysts and the corresponding mechanistic basis remain insufficiently defined. Here, representative visible-light-responsive semiconductors are used as model catalysts to establish a dual-descriptor framework for LFP photocatalytic delithiation, in which band matching serves as the thermodynamic descriptor and O2 activation capability serves as the kinetic descriptor. Among the examined catalysts, ZnIn2S4 combines suitable band positions with favorable O2 adsorption and exhibits the highest apparent first-order rate constant of 0.088 h-1. Under optimized conditions, Li leaching efficiency reaches 98% with low Fe/P co-leaching and suppressed Zn/In/S dissolution. EPR, quenching and atmosphere-controlled experiments, photoelectrochemical measurements, and DFT calculations reveal that ZnIn2S4 provides both the thermodynamic driving force and interfacial O2 activation ability required to generate dominant 1O2 and auxiliary O2·-. The resulting reactive oxygen species (ROS) pathway, dominated by 1O2 and O2·-, promotes Fe2+/Fe3+ conversion and Li+ release from LFP. This work establishes a thermodynamic-kinetic dual-descriptor framework for photocatalyst screening and provides mechanistic guidance for selective lithium separation from spent LFP.