Reha Artan

Reha Artan

Auto-generated profile, based on publicly available information

Reha Artan

İSTANBUL TEKNİK ÜNİVERSİTESİ, TEKNİK OKUL

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 May 2025 in Journal of Elasticity
Verified
Journal Article
Open access
PDF file
RAReha Artan
Reha Artan
ATAYŞEGÜL TEPE
AYŞEGÜL TEPE
Curved nanobeams are fundamental components of nanoscale systems, such as nano and microelectromechanical systems, where accurate modeling of small-scale effects is essential for achieving high precision. This study introduces a novel framework for analyzing the in-plane static behavior of curved nanobeams resting on an elastic foundation, particularly for small displacements. Nonlocal constitutive equations are derived based on nonlocal elasticity theory and solved using the initial value method and the approximate transfer matrix approach to address the challenges arising from the high degree of statical indeterminacy. A convergence analysis is conducted, showing that the proposed method provides a systematic and computationally efficient solution. A parametric analysis reveals that the nonlocal parameter, elastic foundation, and opening angle significantly influence the displacements in the tangential and normal directions, the rotation and bending moment in the binormal direction, the shear force in the normal direction, and the axial force in the tangential direction. These findings further elucidate the mechanics of curved nanostructures, contributing to the design and optimization of nanoscale devices.

2 February 2026 in The Open Construction & Building Technology Journal
Verified
Journal Article
Open access
ETEmre Tavlı
Emre Tavlı
RAReha Artan
Reha Artan
Introduction: Given the critical role of cement in the construction industry and its significant impact on global climate change, there is an urgent need to develop alternatives to the traditional clinker-based cement. In this study, the Eggshell Powder (ESP), used as a partial cement replacement in mortar, with an emphasis on its thermal behavior, passive indoor temperature regulation, and synergistic interactions with multiple supplementary cementitious materials, namely, Fly Ash (FA), Silica Fume (SF), and Blast Furnace Slag (BFS), was investigated. The effects of ESP on shear strength were also investigated, as they have not been extensively documented. Distinctively, this research implemented a large-scale screening of 60 mix designs (360 specimens) to maximize cement reduction while maintaining, or even improving, mechanical performance relative to the control. Methods: Mortars with ESP at 0, 10, 15, and 20 wt.% were tested for flow (EN 1015-3) and flexural and compressive strengths at 7 and 28 days (EN 196-1). Shear strength at 28 days was measured using the Z-push-off method. Blended (ternary and quaternary) mixes replaced 30 wt.% of cement through combinations of ESP, FA, SF, and BFS. Thermal behavior was monitored using chambers (7 × 15 × 15 cm; wall thickness = 4 cm) made with 0, 15, 30, and 50 wt.% ESP over 30 days, with temperature readings taken at 09:00, 12:00, 15:00, 19:00, and 00:00 via type-K thermocouples. Results were summarized as average values. Results: Workability decreased beyond 15 wt.% ESP. The best blended mix (70% cement, 10% ESP, 10% FA, 5% SF, and 5% BFS) exhibited a 12% increase in 28-day compressive strength and a 17.1% increase in 28-day flexural strength compared to the control, while the mix containing 10 wt.% ESP reached a 28% shear strength in 28 days. ESP-modified mixes exhibited an improved passive thermal response, with peak internal temperature reductions of up to ≈ 7°C during hot periods (≈ 12:00– 15:00) and comparable or slightly higher internal temperatures during cooler periods. Discussion: ESP dosages of 5-10 wt% can enhance mechanical performance if they are combined with FA, SF, and BFS. This is likely due to filler densification and nucleation effects in addition to limited pozzolanic activity. Thermal monitoring showed that ESP improves passive regulation under variable ambient conditions. However, the practicality of higher ESP levels (> 15 wt.%) decreases due to increased water demand and reduced workability. Conclusion: Within SCM-blended systems, ESP provides a cost-effective and eco-efficient approach to reducing cement while maintaining or even enhancing mechanical strength and thermal comfort. However, the findings are limited to laboratory-scale and short-term curing conditions (7–28 days). Therefore, future research should extend to long-term durability assessments, such as freeze–thaw resistance, chloride ion penetration, and sulfate attack, along with microstructural validations (SEM, XRD, TGA), building-scale thermal analyses, and techno-economic evaluations to establish the practical feasibility of ESP-modified mortars for sustainable construction applications.

16 December 2025 in Black Sea Journal of Engineering and Science
Verified
Journal Article
Closed access
IKİsMail Önder Kartal
İsMail Önder Kartal
RAReha Artan
Reha Artan
In this study, nonlinear bending behavior of functionally graded graphene nanoplatelet reinforced composite beams is analyzed using Touratier’s higher-order shear deformation theory. Nonlinear equilibrium equations and boundary conditions are derived from the minimum potential energy principle and numerically solved. Equilibrium equations are valid for any beam theory. Equilibrium equations of other beam theories can be easily obtained by changing the f(z) function in these equations. The bending, vibration, and buckling of beams can be easily studied by other theories using the given equilibrium equations and boundary conditions. The graphs of all the unknowns of the problem were presented along the length of the beam. In addition, polynomials fitted to the dimensionless numerical results obtained were given.