Ryan Zhou

Ryan Zhou

Auto-generated profile, based on publicly available information

Ryan Zhou


Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 February 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
RZRujing Zha
Rujing Zha
HCHongshun Chen
Hongshun Chen
ZCZihan Chen
Zihan Chen
MLMalachi Landis
Malachi Landis
Wenpan LiWenpan Li
Wenpan Li
JCJian Cao
Jian Cao
To facilitate data-driven composition-structure-property models suitable for various mechanical and thermal loading conditions, high-throughput material testing methods are highly desirable. In this work, we develop the High-Temperature Dimple Array Bulge Instrument (HT-DABI), a novel materials testing instrument that uses a 5×5 array of induction-heated dimple cells which are inert-gas pressurized to achieve a heterogeneous yet readily resolvable stress condition. Deformation data of the 25 independent cells are measured simultaneously using high-temperature 3D digital image correlation; then, finite-element coupled optimization frameworks extract the elastoplastic and creep properties from the displacement and pressure data. HT-DABI can conduct high-temperature creep experiments parallelized across stress levels, temperatures, and material compositions, as well as elevated-temperature static tensile experiments parallelized across compositions and temperatures. We validate the approach using a wrought IN625 plate and show that this approach can accurately determine the creep exponent and activation energy within 10% of the ground-truth value, at 1/200th of the testing time needed for 25 materials, and the yield stress to within 15%. The DABI system paves the way for a unified component design-testing framework, in which experiments dynamically sample locations in composition space or test interfacial material behavior requested by the optimization framework for rapid co-design of part geometry and composition in a component fabricated from a functionally graded material.

30 June 2026 in Additive Manufacturing
Verified
Journal Article
Closed access
RZRyan Zhou
Ryan Zhou
DDDavid Dunand
David Dunand

9 September 2026 in Acta Materialia
Verified
Journal Article
Closed access
RZRyan Zhou
Ryan Zhou
RRRowan Rolark
Rowan Rolark
JCJian Cao
Jian Cao
DDDavid Dunand
David Dunand

7 August 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
RZRyan Zhou
Ryan Zhou
CLCarlos Lazo
Carlos Lazo
RRRowan Rolark
Rowan Rolark
RZRujing Zha
Rujing Zha
JCJian Cao
Jian Cao
DDDavid Dunand
David Dunand
Laser-based directed energy deposition (DED) with in situ powder blending is used to fabricate stepped-composition alloy couples, enabling rapid property screening of large composition spaces. Composition grading occurs between binary systems of four commercial superalloys: Ni-based Inconel 625 (IN625), Co-based Haynes 25 (HA25), Fe-based stainless steel 316L, and Ni-based Nimonic 80A (N80A). The microstructure and ambient temperature microhardness of these graded couples are analyzed in the as-fabricated state and after heat-treatment (homogenized + inter-diffused 1150 °C / 72 h, aged 800 °C / 24 h). A linear rule-of-mixtures (ROM) model is applied to composition-correlated microhardness to assess (i) the predictive power of ROM between solid-solution strengthened alloys (IN625, HA25, and 316L), and (ii) deviations in ROM as a screening mechanism for precipitation-hardening in Al- and Ti-containing compositions (based on N80A). Single-composition specimens of the four basis alloys and three near-50:50 blends (wt. %) between IN625, HA25, and 316L are subjected to creep in the temperature range 700–850°C. Creep pre-exponential constant A, stress exponent n, and apparent activation energy Qa are extracted for these select compositions; linear ROM is then applied to individual creep coefficients between basis alloys for comparison. Resulting strain rate predictions suggest that blended alloy creep behavior is sufficiently predicted via ROM within a 90% predictive interval of ×10^(±0.39) (2.5×), which is remarkably accurate with respect to the predictive power of the creep power law (×10^(±0.21), 1.6×).

29 July 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
RZRyan Zhou
Ryan Zhou
RRRowan Rolark
Rowan Rolark
JCJian Cao
Jian Cao
DDDavid Dunand
David Dunand
A combinatorial library of one hundred Ni-Co-Fe-Cr(-Al)-based superalloys is synthesized from blends of four basis alloys via powder-blown directed energy deposition: Ni-based INCONEL® 625, Co-based HAYNES® 25, Fe-based stainless steel 316L, and a commercial Ni-Co-Cr-Al-Y bond coat. Four 5×5 alloy arrays are each oxidized in air at 870 or 950 °C for up to 9 days. Oxide scales are characterized by X-ray diffraction (XRD) to quantify phase fractions and infer growth kinetics. Parallelized alloy fabrication and oxidation enable semi-automated XRD measurement and pattern refinement, accelerating characterization by ~5× relative to serial mass gain or cross-section thickness measurements. This scalable experimental framework screens a large quaternary composition space using a logarithmic-growth kinetic constant, K0, as a quantitative metric for oxide scale evolution. XRD-derived K0 shows good agreement with a traditional cross-section approach; correlations between K0 and composition also reproduce established oxidation trends in superalloys. At 950 °C, Al additions reduce K0 and oxide scale thickness (after 9 days) by up to an order of magnitude. The transition between Type II and Type III oxidation occurs at ~5 at. % Al, and a total concentration of Al + Cr ≥ 29 at. % is recommended for alumina-forming superalloy coatings. A Gaussian process regression (GPR) surrogate model is constructed to predict oxidation-resistant compositions, identifying an optimized alloy candidate near binary IN625 + 40 wt. % Ni-Co-Cr-Al-Y; corresponding to an overall composition of Ni-20Cr-9Co-5Al-5Mo-3Fe-2Nb (wt. %).

14 September 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
RZRyan Zhou
Ryan Zhou
CLCarlos Lazo
Carlos Lazo
RRRowan Rolark
Rowan Rolark
RZRujing Zha
Rujing Zha
JCJian Cao
Jian Cao
DDDavid Dunand
David Dunand
Laser-based directed energy deposition (DED) with in situ powder blending is used to fabricate stepped-composition alloy couples, enabling rapid property screening of large composition spaces. Composition grading occurs between binary systems of four commercial superalloys: Ni-based Inconel 625 (IN625), Co-based Haynes 25 (HA25), Fe-based stainless steel 316L, and Ni-based Nimonic 80A (N80A). The microstructure and ambient temperature microhardness of these graded couples are analyzed in the as-fabricated state and after heat-treatment (homogenized + inter-diffused 1150 °C / 72 h, aged 800 °C / 24 h). A linear rule-of-mixtures (ROM) model is applied to composition-correlated microhardness to assess (i) the predictive power of ROM between solid-solution strengthened alloys (IN625, HA25, and 316L), and (ii) deviations in ROM as a screening mechanism for precipitation-hardening in Al- and Ti-containing compositions (based on N80A). Single-composition specimens of the four basis alloys and three near-50:50 blends (wt. %) between IN625, HA25, and 316L are subjected to creep in the temperature range 700–850°C. Creep pre-exponential constant A, stress exponent n, and apparent activation energy Qa are extracted for these select compositions; linear ROM is then applied to individual creep coefficients between basis alloys for comparison. Resulting strain rate predictions suggest that blended alloy creep behavior is sufficiently predicted via ROM within a 90% predictive interval of ×10^(±0.39) (2.5×), which is remarkably accurate with respect to the predictive power of the creep power law (×10^(±0.21), 1.6×).