Ran Wang

Ran Wang

Auto-generated profile, based on publicly available information

Ran Wang

Department of Materials, University of Manchester, Engineering Building A, Manchester M1 7HL, U.K.

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 May 2023 in Energy & Environmental Science
Verified
Journal Article
Open access
PDF file
RWRan Wang
Ran Wang
AAAmal Altujjar
Amal Altujjar
NZNourdine Zibouche
Nourdine Zibouche
XWXuelian Wang
Xuelian Wang
BSBen F. Spencer
Ben F. Spencer
BSBrian R. Saunders
Brian R. Saunders
Perovskite solar cells (PSCs) continue to excite the research community due to their excellent power conversion efficiency (PCE) and relative ease of preparation. Additive engineering has played a decisive role in improving PSC performance and stability. In particular, π-conjugated aromatic additives (CAAs) offer key advantages such as high charge transport. However, the roles of hydrophobicity and structure in determining CAA performance as additives are still being established. Here, we investigate the effects of two coumarin additives on the PCE and stability of PSCs based on Cs0.05(FA0.85MA0.15)0.95Pb(I0.85Br0.15)3 perovskite. The CAAs are coumarin methacrylate (CMA) and coumarin hydroxyethyl (CHE) and were added to the precursor perovskite solutions prior to film deposition with CMA being more hydrophobic than CHE. These additives increase the best PCE of 19.15% for the control to 21.14% and 21.28% for the best devices containing CHE and CMA, respectively. The stability of the devices with the additives are far superior to that of the control (CAA-free) system. The time lengths required for the PCE to decrease to 80% of the initial value for CMA- and CHE-containing devices are 98 and 38 days, respectively, compared to only 14 days for the control. The moisture and thermal stabilities of the systems containing CMA are markedly improved compared to those containing CHE and the control. Our results show that the extents of binding to Pb2+ and passivation increase as the coumarin’s hydrophobicity increases which decreases recombination. Our findings show that adding CAAs with increasing hydrophobic character to the precursor perovskite solution is useful for achieving high-performance and long-term stable PSCs.

29 August 2024 in Energy & Environmental Science
Verified
Journal Article
Open access
PDF file
ZJZhenyu Jia
Zhenyu Jia
RWRan Wang
Ran Wang
LZLei Zhu
Lei Zhu
AAAmal Altujjar
Amal Altujjar
PJPolina Jacoutot
Polina Jacoutot
BSBrian R. Saunders
Brian R. Saunders
Perovskite solar cells (PSCs) provide excellent potential for large-scale solar energy harvesting because of their high power conversion efficiency (PCE) and facile preparation. However, long-term stability remains the Achilles heel for PSCs and new methods for improving stability are urgently needed. Film-forming polymer nanoparticles are widely used in the surface coatings industry to provide scalable, low-cost protection to surfaces. Inspired by this, here we add three soft, film-forming crosslinked polymer nanoparticle systems (nanogels) with different diameters (60, 100 and 200 nm) to the perovskite (FA0.75MA0.25PbI3) precursor solution and study their effects on PSC performance. The nanogels contain hydrophilic ethylene oxide repeat units and form films when their diameter is less than or equal to 100 nm. Device stability was assessed using shelf-life and light-soaking measurements; in addition, films were subjected to moisture challenge tests. We show that nanogel coverage increases the PCE and stability. Ab initio simulations indicate strong binding of the molecules that comprise the nanogels on the perovskite surface through Pb–O bonds, thereby promoting enhanced surface stability in agreement with the XPS and FTIR signals associated with the binding of the CO and C–O groups to Pb. Shelf-life stability measurements showed that nanogels with a diameter of 100 nm gave devices that retained >80% of their initial PCE after more than six months compared to 25% for the control. In contrast, the 200 nm nanogels did not form films or increase the PCE or shelf-life stability. The 100 nm nanogels also gave the best stability to light soaking. Our results show that highly deformable hydrophilic film-forming nanogel particles with a size of ∼100 nm provide a scalable alternative approach for improving passivation and stability of PSCs.

14 February 2024 in RSC Advances
Verified
Journal Article
Open access
PDF file
OAOsama M. Alkhudhari
Osama M. Alkhudhari
RWRan Wang
Ran Wang
ZJZhenyu Jia
Zhenyu Jia
NHNigel W. Hodson
Nigel W. Hodson
AAAmal Alruwaili
Amal Alruwaili
BSBrian R. Saunders
Brian R. Saunders
Semitransparent perovskite solar cells (STPSCs) have excellent potential for widespread application as building integrated photovoltaics. Widespread application of STPSCs could result in decreased CO2 footprints for buildings. Unfortunately, STPSCs tend to have poor aesthetic qualities (being usually red-brown in color) and low stability. Building on our previous work, here we use new poly(N-isopropylacrylamide) microgels (PNP MGs) to provide highly ordered non-close packed arrays within perovskite films that reflect some of the incident light to provide structural color to STPSCs. (MGs are swellable crosslinked polymer colloid particles.) We introduce PNP MGs into two different perovskites and achieve a wide gamut of reflected color and iridescence from the perovskite films. Devices containing the MGs have average visible transparency (AVT) values of greater than 25%. The best PCE for a MG-containing STPSC is 10.60% compared to 9.14% for the MG-free control. The MGs not only introduce structural color to the STPSCs but increase the PCE and stability. Equations are provided that enable the reflected color to be predicted from the formulation used to deposit the films. Our work shows that the self-ordering tendency of PNP MGs gives a viable new method for introducing structural color into STPSCs. Because our one-step method for introducing structural color into STPSCs is general, does not introduce any additional processing steps and is scalable whilst also improving device stability, this study may bring deployment of STPSCs closer.

18 October 2024 in ACS Applied Energy Materials
Verified
Journal Article
Open access
RWRan Wang
Ran Wang
ZJZhenyu Jia
Zhenyu Jia
BSBen F. Spencer
Ben F. Spencer
DZDawei Zhao
Dawei Zhao
Andrew ThomasAndrew Thomas
Andrew Thomas
BSBrian R. Saunders
Brian R. Saunders
Perovskite solar cells (PSCs) offer a potentially large-scale method for producing low-cost renewable energy. However, stability challenges currently limit their practical application. Consequently, alternative methods for increasing the PSC stability are urgently needed. Compared with three-dimensional (3D) perovskites, low-dimensional (LD) perovskites have been shown to have higher stability. In this study, a LD/3D hybrid perovskite strategy is used that involves post-treating the Cs0.05(FA0.98MA0.02)0.95Pb(I0.98Br0.02)3 perovskite with a neutral allyl 1H-imidazole-1-carboxylate (AImC) ligand. We show that this neutral organic spacer molecule has two key roles. AImC acts as a solvent and triggers localized reconstruction to produce a LD capping layer in one postprocessing step. AImC prolongs the carrier lifetime and reduces trap-assisted recombination. As a result, the PSCs containing AImC achieve a maximum power conversion efficiency (PCE) of 21.42% compared to 20.27% for the control device and show significantly decreased hysteresis. AImC also greatly increased the stability of the films and devices to air, moisture, and heat. The results of this study imply that neutral amine liquids that have the correct solvating and ligating properties have good potential to improve the PCE and stability of the PSCs.

10 June 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
YSYao Sun
Yao Sun
WCWei Chen
Wei Chen
XZXuan Zhao
Xuan Zhao
XSXiaoJie Sun
XiaoJie Sun
YWYixi Wang
Yixi Wang
AYAnran Yu
Anran Yu
Metal halide perovskite solar cells (PSCs) are regarded as a highly promising next-generation photovoltaic technology owing to their tunable bandgap, high absorption coefficient, and long carrier diffusion length. Notably, after 2022, the field entered an efficiency explosion period driven by the precision of anti-solvent engineering, standardization of annealing processes, rational design of additive molecules, and optimization of solvent systems, with single-junction certified efficiencies rapidly surpassing 25%. Nevertheless, non-radiative recombination arising from grain boundaries, point defects, and interfacial states in solution-processed polycrystalline films remains the central bottleneck constraining efficiency, while additive engineering—an effective strategy for regulating crystallization kinetics and passivating defects—is also becoming increasingly refined. This study focuses on experimental data of perovskite solar cells from 2022–2025 and constructs a temporal feature concatenation framework: 128-dimensional annual temporal embeddings extracted via Transformer self-attention are concatenated with 106-dimensional raw features (55 basic features + 51 functional group fingerprints) to form 234-dimensional augmented features, which are fed into LightGBM, achieving R² = 0.906 ± 0.008 in five-fold cross-validation. Further concatenation of LSTM, GRU, and Transformer triple embeddings to 490 dimensions raises R² to 0.926 ± 0.007, an absolute improvement of 0.221 in R² over the 106-dimensional static baseline (from 0.705 to 0.926). Additionally, Flow Matching microenvironment modeling is introduced to learn continuous probability paths of formulation distributions in a 50-dimensional latent space. Perturbation analysis reveals that the main solvent backbone and solvent components contribute most significantly to PCE enhancement; the optimal transport path requires only an average of 3.9 steps to guide low-efficiency formulations (<15%) toward the high-efficiency region (≥22%). Virtual formulation screening validated against the literature database achieves an average PCE improvement of +0.65%. Functional group commonality analysis demonstrates perfect overlap in the top-10 high-frequency functional groups between real and generated formulations, confirming that the model captures the scientific principles underlying high-efficiency PSCs. This framework provides an interpretable computational paradigm for data-driven optimization of high-efficiency perovskite formulations.

15 March 2024 in RSC Applied Interfaces
Verified
Journal Article
Open access
PDF file
AAAmal Altujjar
Amal Altujjar
RWRan Wang
Ran Wang
XWXuelian Wang
Xuelian Wang
JSJennifer M. Saunders
Jennifer M. Saunders
ZJZhenyu Jia
Zhenyu Jia
BSBrian R. Saunders
Brian R. Saunders
We use insulating polystyrene colloid particles to selectively cover the electron transport layer of n-i-p perovskite solar cells and investigate the effects of the coverage and lateral blocking distance on device performance.