17 February 2020 in IEEE Transactions on Communications
Sparse code multiple access (SCMA) is one of the competitive non-orthogonal multiple access (NOMA) techniques for the next generation of communication systems. In this paper, a systematic construction procedure for the design of SCMA codebooks under various channel environments is proposed in order to achieve near-optimal designs, especially for cases which consider small-scale SCMA parameters. The procedure includes the rotation angle design, the construction of multi-dimensional codebooks, and the design of labelling rules. The detailed design criteria and the related properties are derived and investigated. A low-complexity construction algorithm is further proposed for the cases of fading channels. Numerical results show that the designed SCMA codebooks provide improvements in error performance for all of the considered channel conditions, when compared to the codebooks presented in the prior literature.
15 November 2022 in IEEE Transactions on Wireless Communications
In this work, we investigate rate-splitting multiple access (RSMA) for a multiuser downlink wireless network consisting of an unmanned aerial vehicle (UAV)-assisted base station (BS) that serves multiple ground users (GUs) simultaneously. Considering two different transmission regimes, namely infinite blocklength (IBL), and finite blocklength (FBL), we analyze the performance of the considered network under the effect of imperfections in channel state information (CSI) estimation and successive interference cancellation (SIC) with the probabilistic line of sight fading channels. For IBL transmission, we derive the closed-form expressions of the outage probability, throughput, and achievable ergodic rate at each GU. Furthermore, for short packet communication, the closed-form expressions of block error rate (BLER), goodput, and achievable ergodic rate are determined with FBL transmission. Moreover, for the FBL regime we also formulate an optimization problem that jointly optimizes the 3D-position of the UAV, power allocated to each user, and common rate distribution at each user to maximize the ergodic sum rate subject to the practical constraints such as maximum tolerable BLER, minimum private and total rate at each user. We then propose an alternating optimization-based iterative algorithm to solve the problem. Monte-Carlo simulations are used to verify the accuracy of derived analytical results and demonstrate the trade-off between transmit power and achievable BLER. In addition to this, the effectiveness of RSMA in UAV-assisted communication under IBL and FBL transmission regimes is also observed compared to non-orthogonal multiple access.
6 July 2022 in IEEE Transactions on Wireless Communications
Sparse code multiple access (SCMA) is a promising code-domain non-orthogonal multiple access (NOMA) technique that supports high-level connectivity. Through the combination of SCMA and multiple-input multiple-output (MIMO) techniques, MIMO-SCMA schemes are capable of enhancing the overall spectral efficiency. This paper proposes novel MIMO-SCMA designs for both uplink and downlink Rayleigh fading channels. Rather than directly combining the SCMA and spatial multiplexing techniques presented in the previous literature, the proposed designs consider not only the frequency or time diversity, but also simultaneously include space diversity. Codebook design criteria for different transmission scenarios are respectively investigated, and a low-complexity codebook design algorithm is proposed based on the cross-entropy method. In addition, since the new designs suggest a dense factor graph, conventional message-passing algorithm (MPA)-based detectors are less suitable. Consequently, low-complexity MIMO-SCMA codeword detectors based on depth-first and breadth-first tree-search algorithms are respectively investigated. It is shown that the overall designs are able to simultaneously achieve a higher diversity order, enhanced BER results, and lower levels of detection complexity for both uplink and downlink scenarios, when compared to conventional MIMO-SCMA schemes.
27 July 2022 in IEEE Transactions on Vehicular Technology
In this paper, a joint design of sparse code multiple access (SCMA) codebook and peak-to-average power ratio (PAPR) reduction based on the partial transmit sequence (PTS) technique is proposed for the downlink orthogonal frequency division multiplexing (OFDM) scheme. A benchmark scheme is firstly devised based on a direct extension of the conventional PTS-based OFDM scheme. Based on the characteristics of the near-optimal SCMA codebook designs reported in our previous work, a PTS-based SCMA-OFDM design is proposed by carefully determining the rotation angles of the SCMA codebooks, according to the adopted signal sub-constellations. A receiver which does not need the side information is further devised. Considering the phase ambiguity issue of the receiver, the PTS angles have been carefully refined. When compared to both the original scheme that does not consider PAPR reduction techniques and the benchmark scheme, the proposed scheme achieves a significantly enhanced PAPR performance with approximately the same error performance. In addition, a comparable PAPR performance, an improved error performance, and a lower computational complexity can be achieved when compared to the clipping-based SCMA-OFDM scheme reported in the previous literature.
6 May 2021 in IEEE Wireless Communications Letters
Sparse Code Multiple Access (SCMA) is a promising technique for next generation mobile communication systems. In this letter, the problems surrounding the design of an SCMA codebook problem are confronted through the use of Artificial Intelligence (AI) techniques. The suggested algorithm is based on Reinforcement Learning (RL). The design parameters include a set of actions, a set of states, and a reward function. It is shown that the proposed algorithm is capable of generating codebooks that include superior metric values and optimized signal constellations based on low levels of searching complexity. The low-complexity feature in the RL-based construction algorithm ensures that it is more suitable to applications that rely on large-scale SCMA schemes.
27 June 2023 in IEEE Transactions on Dependable and Secure Computing
In this paper, an error-correction-based iris recognition (EC-IR) scheme that guarantees both secure template storage and high-level recognition accuracy is first constructed for personal authentication. From the analysis of both the soft reliability values for the iris bits and the recovery capability values for the low-density parity-check (LDPC) code bits, a method called template mapping is devised in order to freely adjust the error-correction capability of the EC-IR scheme. The design process for suitable LDPC codes is then investigated so as to provide a stable and high-rate EC-IR scheme. In order to further enhance the security level of the EC-IR scheme, we propose locating the dominating feature points (DFPs), and then using them for iris recognition rather than using the original binary templates acquired from the iris database. The DFP-based EC-IR scheme not only enhances the security level, but also provides a better equal error rate (EER) performance and a faster processing speed during the verification stage. As a result, an iris cryptosystem based on the fuzzy commitment strategy is eventually constructed founded on a comprehensive consideration of both a satisfactory recognition performance combined with a high security level.