A switchable dry adhesive based on a nickel–titanium (NiTi) shape‐memory alloy with an adhesive silicone rubber surface has been developed. Although several studies investigate micropatterned, bioinspired adhesive surfaces, very few focus on reversible adhesion. The system here is based on the indentation‐induced two‐way shape‐memory effect in NiTi alloys. NiTi is trained by mechanical deformation through indentation and grinding to elicit a temperature‐induced switchable topography with protrusions at high temperature and a flat surface at low temperature. The trained surfaces are coated with either a smooth or a patterned adhesive polydimethylsiloxane (PDMS) layer, resulting in a temperature‐induced switchable surface, used for dry adhesion. Adhesion tests show that the temperature‐induced topographical change of the NiTi influences the adhesive performance of the hybrid system. For samples with a smooth PDMS layer the transition from flat to structured state reduces adhesion by 56%, and for samples with a micropatterned PDMS layer adhesion is switchable by nearly 100%. Both hybrid systems reveal strong reversibility related to the NiTi martensitic phase transformation, allowing repeated switching between an adhesive and a nonadhesive state. These effects have been discussed in terms of reversible changes in contact area and varying tilt angles of the pillars with respect to the substrate surface.
1 December 2004 in Composites Science and Technology
Mechanical behavior and reliability of composites are driven significantly by microstructural variability. Such variability can be present in the form of both morphological and constituent property variability. To understand the effect of this variability on macroscopic mechanical behavior, many statistically equivalent microstructures must be evaluated. This requires the ability to generate such microstructures. In this work, morphological variability was quantified by image analysis of actual microstructures. To reproduce this variability, a methodology was developed in which random microstructures are generated and subsequently adjusted to simultaneously match both short- and long-range statistics of actual microstructures. Synthetic microstructures were generated at a length scale of 70 µm, corresponding to the length scale at which fiber volume fractions of adjacent microstructures are uncorrelated. The utility of this methodology was also demonstrated for larger microstructures containing defects such as alignment fibers, voids and resin seams.