High-quality and reproducible perovskite layer fabrication routes are essential for the implementation of efficient planar solar cells. Here, we introduce a sequential vapor-processing route based on physical vacuum evaporation of a PbCl2 layer followed by chemical reaction with methyl-ammonium iodide vapor. The demonstrated vapor-grown perovskite layers show compact, pinhole-free, and uniform microstructure with the average grain size of ~ 320 nm. Planar heterojunction perovskite solar cells are fabricated using TiO2 and spiro-OMeTAD charge transporting layers in regular n-i-p form. The devices exhibit the best efficiency of 11.5% with small deviation indicating the high uniformity and reproducibility of the perovskite layers formed by this route.
Performance and the stability of the perovskite-based photovoltaic devices are directly linked to existing trap-states or defect profiles at the surface and/or in the bulk of perovskite layers. Hence identification of stemming the defects during perovskite formation is crucial for achieving superior and long-lasting performances. Here, we present the effect of 1-Pentanethiol incorporation into the one-step deposition of perovskite layers. A feasible glove box-free route results in high-quality CH3NH3PbI3 layers under highly humid conditions (RH > 50%) but at low temperatures (T < 18 °C). 1-Pentanethiol addition into the washing solvent leads to the refinement of I/Pb stoichiometry, elimination of the iodide deficiencies, and reduction of the trap-state densities. Consequently, a precise amount 1-Pentanethiol addition enhances photovoltaic performances, resulting in a 54% PCE improvement for CH3NH3PbI3-based inverted solar cells.