The photocatalytic depolymerization of lignin is a sustainable strategy to produce high-value aromatic chemicals. The selective and efficient cleavage of β-O-4 bonds under mild conditions remains one of the challenges in lignin valorization. Herein, an efficient and mild strategy was employed for one-step photocatalytic depolymerization of lignin and β-O-4 model compounds over novel Z-scheme heterojunction g-C3N4/carbon quantum dot/CdZnS (CN/CQD/CZS) under simulated solar light. The total yield of vanillin and vanillic acid from lignin depolymerization was 36.3 mg g−1 lignin when the volume ratio of SDS-8 (sodium dodecyl sulfate solution with a mass fraction of 0.08%) to HCOOH was 4 : 1 within 2 h. The depolymerization mechanism of lignin was investigated using β-O-4 model compounds. The β-O-4 model compounds were converted into phenolic monomers over optimized CN/CQD/CZS, yielding 84% substrate conversion and ∼100% C–O bond cleavage selectivity. Three extractive natural lignin samples were applied to this system and successfully depolymerized. A combination of experimental results and theoretical calculations illustrated that CQDs played a crucial role in accelerating photogenerated electron transfer at the CN/CZS interface via the Z-scheme electron pathway, which effectively promoted the separation and transfer of photoexcited hole–electron pairs. Mechanistic studies demonstrated that the selective cleavage of the β-O-4 bond mainly involved a photogenerated electron–hole coupled redox mechanism. The construction of the Z-scheme CN/CQD/CZS heterojunction is essential to enhance the kinetics of electron transport and maintain strong redox ability. The approach in this work offers a useful guidance for the construction of Z-scheme heterojunction photocatalysts with a carbon-based electron mediator and the selective breakage of C–O bonds in lignin.
Lignin, the most abundant renewable resource of aromatics in nature, is recognized as an alternative for fossil-based fuels and chemicals. Herein, we propose an efficient method to obtain aromatic monomers by lignin depolymerization using magnetic silica supported Brønsted acidic ionic liquid (BAIL–Fe3O4@SiO2), which has higher catalytic activity and easier separate property compared with the traditional lignin depolymerization in ionic liquids. The prepared BAIL (30 wt%)–Fe3O4@SiO2 catalyst is magnetic, mesoporous, thermostable, and core–shell structured, with a diameter of 500–600 nm, BET surface area of 185.7 m2 g−1, and pore size of 4.362 nm. The results showed that in the presence of 40 wt% of BAIL (30 wt%)–Fe3O4@SiO2 at 160 °C for 3 h, the conversion of lignin increased markedly to 54.0% and 33.0% yield of aromatic monomers were acquired. Among the ethanol-soluble liquid products from lignin depolymerization over BAIL (30 wt%)–Fe3O4@SiO2, the aryl aldehyde is predominant and has a yield of 19.2%. Furthermore, other products were also detected, for which the molecular mass was less than 250 Da, the double bond equivalent value varied from 4 to 7, and the carbon number was within the range of 6–15. The reusability experiment showed that the conversion of lignin and the yield of aromatic monomers can still achieve 90.4% and 91.2% of that catalyzed by fresh catalyst after the 3rd cycle.
Fabricating highly efficient Pd-based nanocatalysts with a well-defined structure is desired for the commercialization of direct ethanol fuel cell (DEFC). Herein, a series of hierarchical three-dimensional N-doped hollow graphene spheres (NHGS) supported dendritic PdCu alloy catalysts Pd$_{x}$Cu$_{(d)}$-NHGS (x: Cu/Pd theoretical molar ratio of 4, 2, and 1) are assembled by one-pot ascorbic acid reduction-immobilization method. Aiming to maximize the Pd utilization and realize the efficient ethanol electrooxidation, this novel electrocatalyst offers potent activity sites and promotes electron and ion kinetics simultaneously. Characterization indicates that the as-obtained Pd$_{4}$Cu$_{(d)}$ alloy nanoparticles with average sizes of approximately 55 nm are evenly dispersed on the NHGS supporting materials obtained by using the SiO2 nanospheres template strategy. Three catalysts all exhibit enhanced electrocatalytic activity, of which the Pd$_{4}$Cu$_{(d)}$-NHGS shows the highest mass current activity (2683 mA mg$_{Pd}$$^{-1}$), which is 2.59 times of the commercial Pd/C toward ethanol electrooxidation in alkaline medium. Based on the results, we believed that the Pd$_{4}$Cu$_{(d)}$-NHGS could exhibit extensive application prospect in alkaline DEFC. Key words: