1 February 2022 in Journal of Performance of Constructed Facilities
Large-span spatial steel structures are subject to complex stress conditions during construction, especially during the unloading phase, and they are easily affected by the environment and the loading method. Therefore, it is necessary to analyze the influence of different unloading construction methods on the structural reliability during construction to improve the quality of construction safety. In this paper, ANSYS version 16.0 software is used to establish a finite-element analysis model of the truss structure of the Harbin railway station. The synchronous unloading process and asynchronous unloading process are numerically simulated, and the stress variation trend of the arch truss during the unloading stage is studied. The research results show that the effect of simultaneous unloading on the mechanical state of the structure is small. During the unloading process, stress is more likely to exceed its limit in the area where the boundary conditions change. Then axial strain monitoring was performed during the actual unloading process of the truss structure of the Harbin railway station. The results show that the effect of synchronous unloading on the structure’s stress state is small, which is in good agreement with the numerical simulation results.
1 January 2018 in Shock and Vibration
Snowfall is one of the environmental factors that can cause effects on the identification of structural modal parameters. For the steel structure roof of the Harbin Railway Station, effects of snow load to the modal parameters were investigated. A single‐span simply supported beam was analysed from the theoretical perspective to study the principles. FEM‐based analyses were conducted for the steel structure roof to illustrate the significance of the snow load effects to modal parameters. Uniformly and nonuniformly distributed snow loads were regarded as the essential factors influencing modal frequencies and mode shapes. Monitoring response data are collected and analysed to confirm the accuracy of analytical results. It is concluded that snowfall‐induced variations on structural stiffness and mass matrices reduce the modal parameters and alter the mode shapes. The differences between the change regulations of the various modes are closely related to the distributions of snow loads. The theoretical and numerical analytical results are validated to be feasible and credible using temperature, axial strain, and acceleration measurements from the Harbin Railway Station field monitoring system.
1 January 2018 in Shock and Vibration
The deformation and damage mechanism of shell structures under near‐field explosion loads has been of great significance in the theoretical study of impact dynamics and may serve as a dependable theoretic basis for the antiexplosion design of shell structures. In this paper, the plastic zone and crevasse size of clamped square plates under near‐field explosion loads were discussed based on the plastic hinge law and energy theory. The crevasse size of a plate moving at motion modes Ι and ΙΙ under medium load was obtained according to the ultimate plastic strain criterion. Furthermore, the plastic zone under a high load was determined in terms of the movement law of a plastic hinge line. When the applied load ended, the crevasse sizes of the plates at motion modes III and IV were deduced on the basis of the principle of energy conservation. Finally, numerical simulation was used to analyse the deformation and damage mechanism of the shell structures under near‐field explosion loads. The theory and method proposed in this paper are verified using ANSYS software and compared with the experimental results. This study verifies the validity of the proposed approach for analysis of the deformation and damage of a clamped square plate under near‐field explosion loads.