16 January 2019 in IEEE Transactions on Cybernetics
Robotic prostheses deliver greater function than passive prostheses, but we face the challenge of tuning a large number of control parameters in order to personalize the device for individual amputee users. This problem is not easily solved by traditional control designs or the latest robotic technology. Reinforcement learning (RL) is naturally appealing. The recent, unprecedented success of AlphaZero demonstrated RL as a feasible, large-scale problem solver. However, the prosthesis-tuning problem is associated with several unaddressed issues such as that it does not have a known and stable model, the continuous states and controls of the problem may result in a curse of dimensionality, and the human-prosthesis system is constantly subject to measurement noise, environmental change and human-body-caused variations. In this paper, we demonstrated the feasibility of direct heuristic dynamic programming, an approximate dynamic programming (ADP) approach, to automatically tune the 12 robotic knee prosthesis parameters to meet individual human users’ needs. We tested the ADP-tuner on two subjects (one able-bodied subject and one amputee subject) walking at a fixed speed on a treadmill. The ADP-tuner learned to reach target gait kinematics in an average of 300 gait cycles or 10 min of walking. We observed improved ADP tuning performance when we transferred a previously learned ADP controller to a new learning session with the same subject. To the best of our knowledge, our approach to personalize robotic prostheses is the first implementation of online ADP learning control to a clinical problem involving human subjects.
27 May 2021 in IEEE Transactions on Robotics
Personalizing medical devices such as lower limb wearable robots is challenging. While the initial feasibility of automating the process of knee prosthesis control parameter tuning has been demonstrated in a principled way, the next critical issue is to improve tuning efficiency and speed it up for the human user, in clinic settings, while maintaining human safety. We, therefore, propose a policy iteration with constraint embedded (PICE) method as an innovative solution to the problem under the framework of reinforcement learning. Central to PICE is the use of a projected Bellman equation with a constraint of assuring positive semidefiniteness of performance values during policy evaluation. Additionally, we developed both online and offline PICE implementations that provide additional flexibility for the designer to fully utilize measurement data, either from on-policy or off-policy, to further improve PICE tuning efficiency. Our human subject testing showed that the PICE provided effective policies with significantly reduced tuning time. For the first time, we also experimentally evaluated and demonstrated the robustness of the deployed policies by applying them to different tasks and users. Putting it together, our new way of problem solving has been effective as PICE has demonstrated its potential toward truly automating the process of control parameter tuning for robotic knee prosthesis users.
6 April 2021 in Journal of Neural Engineering
Objectives. This paper aims to investigate the feasibility and the validity of applying deep convolutional neural networks (CNN) to identify motor unit (MU) spike trains and estimate the neural drive to muscles from high-density electromyography (HD-EMG) signals in real time. Two distinct deep CNNs are compared with the convolution kernel compensation (CKC) algorithm using simulated and experimentally recorded signals. The effects of window size and step size of the input HD-EMG signals are also investigated. Approach. The MU spike trains were first identified with the CKC algorithm. The HD-EMG signals and spike trains were used to train the deep CNN. Then, the deep CNN decomposed the HD-EMG signals into MU discharge times in real time. Two CNN approaches are compared with the CKC: (a) multiple single-output deep CNN (SO-DCNN) with one MU decomposed per network, and (b) one multiple-output deep CNN (MO-DCNN) to decompose all MUs (up to 23) with one network. Main results. The MO-DCNN outperformed the SO-DCNN in terms of training time (3.2–21.4 s epoch−1 vs 6.5–47.8 s epoch−1, respectively) and prediction time (0.04 vs 0.27 s sample−1, respectively). The optimal window size and step size for MO-DCNN were 120 and 20 data points, respectively. It results in sensitivity of 98% and 85% with simulated and experimentally recorded HD-EMG signals, respectively. There is a high cross-correlation coefficient between the neural drive estimated with CKC and that estimated with MO-DCNN (range of r-value across conditions: 0.88–0.95). Significance. We demonstrate the feasibility and the validity of using deep CNN to accurately identify MU activity from HD-EMG with a latency lower than 80 ms, which falls within the lower bound of the human electromechanical delay. This method opens many opportunities for using the neural drive to interface humans with assistive devices.
27 December 2021 in Journal of NeuroEngineering and Rehabilitation
Background: Human-human (HH) interaction mediated by machines (e.g., robots or passive sensorized devices), which we call human-machine-human (HMH) interaction, has been studied with increasing interest in the last decade. The use of machines allows the implementation of different forms of audiovisual and/or physical interaction in dyadic tasks. HMH interaction between two partners can improve the dyad’s ability to accomplish a joint motor task (task performance) beyond either partner’s ability to perform the task solo. It can also be used to more efficiently train an individual to improve their solo task performance (individual motor learning). We review recent research on the impact of HMH interaction on task performance and individual motor learning in the context of motor control and rehabilitation, and we propose future research directions in this area.Methods: A systematic search was performed on the Scopus, IEEE Xplore, and PubMed databases. The search query was designed to find studies that involve HMH interaction in motor control and rehabilitation settings. Studies that do not investigate the effect of changing the interaction conditions were filtered out. Thirty-one studies met our inclusion criteria and were used in the qualitative synthesis.Results: Studies are analyzed based on their results related to the effects of interaction type (e.g., audiovisual communication and/or physical interaction), interaction mode (collaborative, cooperative, co-active, and competitive), and partner characteristics. Visuo-physical interaction generally results in better dyadic task performance than visual interaction alone. In cases where the physical interaction between humans is described by a spring, there are conflicting results as to the effect of the stiffness of the spring. In terms of partner characteristics, having a more skilled partner improves dyadic task performance more than having a less skilled partner. However, conflicting results were observed in terms of individual motor learning.Conclusions: Although it is difficult to draw clear conclusions as to which interaction type, mode, or partner characteristic may lead to optimal task performance or individual motor learning, these results show the possibility for improved outcomes through HMH interaction. Future work that focuses on selecting the optimal personalized interaction conditions and exploring their impact on rehabilitation settings may facilitate the transition of HMH training protocols to clinical implementations.
29 January 2024 in IEEE Transactions on Robotics
Controlling the interaction forces between a human and an exoskeleton is crucial for providing transparency or adjusting assistance or resistance levels. However, it is an open problem to control the interaction forces of lower-limb exoskeletons designed for unrestricted overground walking. For these types of exoskeletons, it is challenging to implement force/torque sensors at every contact between the user and the exoskeleton for direct force measurement. Moreover, it is important to compensate for the exoskeleton's whole-body gravitational and dynamical forces, especially for heavy lower-limb exoskeletons. Previous works either simplified the dynamic model by treating the legs as independent double pendulums, or they did not close the loop with interaction force feedback. The proposed whole-exoskeleton closed-loop compensation (WECC) method calculates the interaction torques during the complete gait cycle by using whole-body dynamics and joint torque measurements on a hip-knee exoskeleton. Furthermore, it uses a constrained optimization scheme to track desired interaction torques in a closed loop while considering physical and safety constraints. We evaluated the haptic transparency and dynamic interaction torque tracking of WECC control on three subjects. We also compared the performance of WECC with a controller based on a simplified dynamic model and a passive version of the exoskeleton. The WECC controller results in a consistently low absolute interaction torque error during the whole gait cycle for both zero and nonzero desired interaction torques. In contrast, the simplified controller yields poor performance in tracking desired interaction torques during the stance phase
6 May 2021 in IEEE Transactions on Neural Networks and Learning Systems
We are motivated by the real challenges presented in a human–robot system to develop new designs that are efficient at data level and with performance guarantees, such as stability and optimality at system level. Existing approximate/adaptive dynamic programming (ADP) results that consider system performance theoretically are not readily providing practically useful learning control algorithms for this problem, and reinforcement learning (RL) algorithms that address the issue of data efficiency usually do not have performance guarantees for the controlled system. This study fills these important voids by introducing innovative features to the policy iteration algorithm. We introduce flexible policy iteration (FPI), which can flexibly and organically integrate experience replay and supplemental values from prior experience into the RL controller. We show system-level performances, including convergence of the approximate value function, (sub)optimality of the solution, and stability of the system. We demonstrate the effectiveness of the FPI via realistic simulations of the human–robot system. It is noted that the problem we face in this study may be difficult to address by design methods based on classical control theory as it is nearly impossible to obtain a customized mathematical model of a human–robot system either online or offline. The results we have obtained also indicate the great potential of RL control to solving realistic and challenging problems with high-dimensional control inputs.