17 January 2023 in Journal of Fluid Mechanics
Dynamic mode decomposition (DMD) describes complex dynamic processes through a hierarchy of simpler coherent features. DMD is regularly used to understand the fundamental characteristics of turbulence and is closely related to Koopman operators. However, verifying the decomposition, equivalently the computed spectral features of Koopman operators, remains a significant challenge due to the infinite-dimensional nature of Koopman operators. Challenges include spurious (unphysical) modes and dealing with continuous spectra, which both occur regularly in turbulent flows. Residual dynamic mode decomposition (ResDMD), introduced by Colbrook & Townsend (Rigorous data-driven computation of spectral properties of Koopman operators for dynamical systems. 2021. arXiv:2111.14889), overcomes such challenges through the data-driven computation of residuals associated with the full infinite-dimensional Koopman operator. ResDMD computes spectra and pseudospectra of general Koopman operators with error control and computes smoothed approximations of spectral measures (including continuous spectra) with explicit high-order convergence theorems. ResDMD thus provides robust and verified Koopmanism. We implement ResDMD and demonstrate its application in various fluid dynamic situations at varying Reynolds numbers from both numerical and experimental data. Examples include vortex shedding behind a cylinder, hot-wire data acquired in a turbulent boundary layer, particle image velocimetry data focusing on a wall-jet flow and laser-induced plasma acoustic pressure signals. We present some advantages of ResDMD: the ability to resolve nonlinear and transient modes verifiably; the verification of learnt dictionaries; the verification of Koopman mode decompositions; and spectral calculations with reduced broadening effects. We also discuss how a new ordering of modes via residuals enables greater accuracy than the traditional modulus ordering (e.g. when forecasting) with a smaller dictionary. This result paves the way for more significant dynamic compression of large datasets without sacrificing accuracy.
1 August 2020 in Physics of Fluids
The hydrodynamic effects of inclined uniform continuous blowing on a turbulent boundary layer are investigated experimentally. A laminar flow is introduced into the boundary layer through a fence on a flat plate at a distance of 3.38δ0 upstream of the trailing edge. The effects of this open-loop technique of flow control are examined at different angles of injection and at different blowing rates. Surface pressure fluctuations acquired from flush-mounted microphones are used to estimate the trailing edge noise. Injection angles of 70° and 90° in combination with strong blowing rates enable a noise reduction of up to 15 dB at mid and high frequencies, f > 300 Hz. Similar aeroacoustic performances are obtained at a blowing angle of 50° but at lower blowing rates. At low frequencies, a penalty is expected, with the trailing edge noise increasing for all the injection angles and blowing rates under analysis. Mean velocity profiles from hot-wire anemometry reveal that high injection angles and strong blowing rates induce a flow separation, which is expected to deteriorate the aerodynamic performances. When applying a uniform blowing at 50°, however, no flow separation occurs. From an aeroacoustic and aerodynamic point of view, uniform blowing applied at 50° and at intermediate blowing rates is found to be the most promising setting.
1 October 2021 in Journal of Sound and Vibration
1 June 2022 in AIAA Journal
The aeroacoustic properties of porous fabrics are investigated experimentally with the goal of finding a fabric that serves as an improved interface between wind tunnel flow and quiescent condition...
1 September 2022 in Journal of Aircraft
A detailed three-dimensional (3D) two-way coupled fluid–structure interaction simulation of a hybrid anechoic wind tunnel (HAWT) test section is presented with modeling all important effects, namely, turbulence, Kevlar wall porosity, and deflection. The complete 3D flowfield around a 3-ft chord NACA0012 placed into a HAWT test section is assessed. The Kevlar deflections are captured using finite element analysis, whereas 3D Reynolds-averaged Navier–Stokes computational fluid dynamics simulations are used to resolve the flowfield. Source terms are used to model the transpiration flow across the pores of the Kevlar fabric. Results are validated against an extensive experimental dataset. Aerodynamic properties of the airfoil are validated using airfoil pressure coefficients, airfoil wake pressure coefficients, and lift and drag coefficients. Boundary effects are validated against Kevlar wall pressure coefficients, Kevlar displacement, and transpiration velocity through the Kevlar fabric. Overall, a good agreement has been found among all comparisons presented. While some minor discrepancies were observed, these primarily stem from geometrical irregularities of the model and wind tunnel unresolved in the computational fluid dynamics. Overall, the fluid–structure interaction model now enables a detailed assessment of HAWTs to enhance their performance and can support experimental testing.