Sathya Ganta

Sathya Ganta

Auto-generated profile, based on publicly available information

Sathya Ganta

Applied Materials, Inc., 3333 Scott Blvd., Santa Clara, CA 95054, United States of America

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2024 in Physics of Plasmas
Verified
Journal Article
Open access
PDF file
SGSathya S Ganta
Sathya S Ganta
KBKallol Bera
Kallol Bera
SRShahid Rauf
Shahid Rauf
IKIgor D. Kaganovich
Igor D. Kaganovich
AKAlexander Khrabrov
Alexander Khrabrov
LXLiang Xu
Liang Xu
The effect of a uniform magnetic field on particle transport in low-pressure radio frequency (RF) capacitively coupled plasma (CCP) has been studied using a particle-in-cell model. Three distinct regimes of plasma behavior can be identified as a function of the magnetic field. In the first regime at low magnetic fields, asymmetric plasma profiles are observed within the CCP chamber due to the effect of E→×B→ drift. As the magnetic field increases, instabilities develop and form self-organized spoke-shaped structures that are distinctly seen within the bulk plasma closer to the sheath. In this second regime, the spoke-shaped coherent structures rotate inside the plasma chamber in the −E→×B→ direction, where E→ and B→ are the DC electric and magnetic field vectors, respectively, and the DC electric field exists in the sheath and pre-sheath regions. The spoke rotation frequency is in the megahertz range. As the magnetic field strength increases further, the rotating coherent spokes continue to exist near the sheath. The coherent structures are, however, accompanied by new small-scale incoherent structures originating and moving within the bulk plasma region away from the sheath. This is the third regime of plasma behavior. The threshold values of the magnetic field between these regimes were found not to vary with changing plasma reactor geometry (e.g., area ratio between ground and powered electrodes) or the use of an external capacitor between the RF-powered electrode and the RF source. The threshold values of the magnetic field between these regimes shift toward higher values with increasing gas pressure. Analysis of the results indicates that the rotating structures are due to the lower hybrid instability driven by density gradients and electron-neutral collisions. This paper provides guidance on the upper limit of the magnetic field for instability-free operation in low-pressure CCP-based semiconductor deposition and etch systems that use the external magnetic field for plasma uniformity control.

1 October 2023 in Plasma Sources Science and Technology
Verified
Journal Article
Closed access
LXLiang Xu
Liang Xu
HSHaomin Sun
Haomin Sun
DEDenis Eremin
Denis Eremin
SGSathya Ganta
Sathya Ganta
IKIgor D. Kaganovich
Igor D. Kaganovich
XWXuemei Wu
Xuemei Wu
In this work, the transition from the gradient drift instability (GDI) into an m = 1 rotating spoke in the radio frequency magnetron discharge was studied by means of the two-dimensional axial-azimuthal (z − y) particle-in-cell/Monte Carlo collision method. The kinetic model combined with the linear analysis of the perturbation revealed that the cathode sheath (axial) electric field E z triggers the GDI, deforming the local potential until the instability condition is not fulfilled and the fluctuation growth stops in which moment the instability becomes saturated. The potential deformation consequently leads to the formation of the potential hump, surrounding which the azimuthal electric field E y is present. The saturation level of E y was found to be synchronized with and proportional to the time-changing voltage applied at the cathode, resulting in the RF-modulation of the electron heating in the E y due to ∇ B drift. In the saturated stage of the instability, it was shown that the rotation velocity and direction of the spoke present in the simulations agree well with the experimental observation (Panjan 2019 J. Appl. Phys. 125 203303). In the instability linear stage, the instability mode wavelength and the growth rate were also found to be in good agreement with the prediction of the GDI linear fluid theory.

29 February 2024 in Journal of Physics D: Applied Physics
Verified
Journal Article
Closed access
KBKallol Bera
Kallol Bera
AVAbhishek Verma
Abhishek Verma
SGSathya Ganta
Sathya Ganta
SRShahid Rauf
Shahid Rauf
An understanding of the plasma dynamics of radio-frequency (RF) hollow cathode discharges (HCDs) at low to moderate pressures is important due to their wide range of applications. A HCD consists of a hollow cylindrical cavity in the RF-powered cathode separated from a grounded electrode by a dielectric. In RF HCDs, RF sheath heating can play a significant role in plasma production in addition to secondary electrons. In this study, a single hollow cathode hole is modeled using the particle-in-cell/Monte Carlo collision (PIC-MCC) technique at low pressure, where kinetic effects are important. Characterization of a single hollow cathode using PIC-MCC simulation is, however, computationally expensive. For improved computational efficiency, a neural network modeling framework has been developed using the temporal variations of applied RF voltages as input and the electrode current as output. A space-filling design for computational experiments is used, where the variables include the RF voltage at the fundamental frequency, RF voltage at the second harmonic, and their phase difference. The predictions of the electrode current using the trained neural network model compare well with the results of the PIC/MCC simulations, but at a significantly lower computational cost. The neural network model predicts the current very well inside the training domain, and reasonably well even outside the training domain considered in this study.

1 December 2024 in Plasma Sources Science and Technology
Verified
Journal Article
Closed access
SRShahid Rauf
Shahid Rauf
SGSathya Ganta
Sathya Ganta
XSXingyi Shi
Xingyi Shi
KBKallol Bera
Kallol Bera
JKJason Kenney
Jason Kenney
This article discusses the characteristics of an Ar/CF4 capacitively coupled plasma (CCP) excited using 40 MHz sinusoidal and 800 kHz rectangular voltage waveforms. The simulations focus on the effect of the low frequency (LF) rectangular wave duty cycle (defined as the period at negative voltage) on the plasma properties and uniformity for constant 100 W power at 40 MHz and 20 mTorr gas pressure. Given the importance of kinetic effects in low pressure CCPs, a hybrid plasma model is used. This model treats electrons as particles using the particle-in-cell formalism while ions and neutral species are represented as fluids. By incorporating electron kinetic effects, this approach allows for the accurate modeling of low-pressure CCPs with complex plasma chemistries. Results show that, at 80% duty cycle, the peak in the density of all species is near the edge of the electrodes. As the LF rectangular wave duty cycle is decreased while keeping the 40 MHz power fixed, the species’ densities increase, the 40 MHz radio-frequency voltage decreases, and the peak in species’ densities shifts towards the chamber center. These trends can be explained based on how the LF voltage modulates the coupling of 40 MHz power to the electrons. Under the conditions considered, the plasma is mostly produced through electron stochastic heating at the sheath edge by the 40 MHz voltage. The 40 MHz couples to the electrons more efficiently when the LF voltage at the powered electrode sheath is small and the sheath is thin. The plasma is produced relatively uniformly in the inter-electrode region during this phase. Therefore, at small duty cycles when the powered electrode sheath is thin for a long time, the plasma is uniform and requires a smaller 40 MHz voltage to deposit 100 W at 40 MHz in the plasma. When the LF voltage in the powered electrode sheath is large and negative, plasma production is weak and occurs at the edge of the powered electrode where the sheath is thinner. At large duty cycles, the plasma is efficiently produced for only a short period, necessitating a larger 40 MHz voltage. The plasma density also peaks near the electrode edge at large duty cycles.

22 May 2022
Verified
Conference Paper
Closed access
KBK. Bera
K. Bera
AVA. Verma
A. Verma
XLX. Li
X. Li
SGS. Ganta
S. Ganta
SRS. Rauf
S. Rauf
Radio-frequency (RF) hollow cathode discharges (HCD) at moderate pressures have gained significance for advanced plasma processes. HCDs form in cylindrical cavities in the cathode. An array of such cavities can be used to create large area HCDs. Under certain conditions plasma in hollow cavities becomes more intense. In this study, a single hollow cathode hole is simulated using a hybrid plasma model. The model includes continuity equations for charged and neutral species, drift-diffusion approximation for electron flux, momentum conservation equation for ions, and Poisson equation. A Monte Carlo model for secondary electrons is used to accurately compute production rates of species, which are coupled to the fluid plasma model. RF hollow cathode behavior is simulated for different design and operating conditions. The plasma penetration inside hollow cathode hole is enhanced depending on pressure and hole size. The plasma enhancement due to RF sheath heating with increase in frequency, and secondary electron emission have been explored synergistically. Hybrid plasma simulation being computationally expensive, a surrogate modeling framework is developed based on recurrent neural network, using LSTM (Long Short-Term Memory) based closure. Different methodologies have been explored to train and validate LSTM network. The prediction of trained network compares well with that of underlying physical model at different conditions, improving the applicability of plasma model for design and optimization purposes.