Guangdong Engineering Research Center of Optoelectronic Functional Materials and Devices School of Electronic Science and Engineering (School of Microelectronics) South China Normal University Guangzhou China
Auto-generated profile, based on publicly available information
Shuti Li
Guangdong Engineering Research Center of Optoelectronic Functional Materials and Devices School of Electronic Science and Engineering (School of Microelectronics) South China Normal University Guangzhou China
Nonpolar a-axial GaN nanowire (NW) was first used to construct the MSM (metal–semiconductor–metal) symmetrical Schottky contact device for application as visible-blind ultraviolet (UV) detector. Without any surface or composition modifications, the fabricated device demonstrated a superior performance through a combination of its high sensitivity (up to 104 A W−1) and EQE value (up to 105), as well as ultrafast (<26 ms) response speed, which indicates that a balance between the photocurrent gain and the response speed has been achieved. Based on its excellent photoresponse performance, an optical logic AND gate and OR gate have been demonstrated for performing photo-electronic coupled logic devices by further integrating the fabricated GaN NW detectors, which logically convert optical signals to electrical signals in real time. These results indicate the possibility of using a nonpolar a-axial GaN NW not only as a high performance UV detector, but also as a stable optical logic device, both in light-wave communications and for future memory storage.
A p-type InGaN hole reservoir layer (HRL) was designed and incorporated in GaN based light-emitting diodes (LEDs) to enhance hole injection efficiency and alleviate efficiency droop. The fabricated LEDs with p-type HRL exhibited higher light output power, smaller emission energy shift and broadening as compared to its counterpart. Based on electrical and optical characteristics analysis and numerical simulation, these improvements are mainly attributed to the alleviated band bending in the last couple of quantum well and electron blocking layer, and thus better hole injection efficiency. Meanwhile, the efficiency droop can be effectively mitigated when the p-InGaN HRL was used.
19 October 2017 in Journal of Materials Chemistry C
Considering their reduced size and weight, low cost and portability, self-powered photodetectors that can be functioned independently of an external power supply are extremely important for developing future sensor networks and Internets of Things. Here, we present a self-powered photodetector with a broadband wavelength photoresponse from the ultraviolet to near-infrared region based on GaN microwire array/Si heterojunctions. Due to the highly efficient separation of photogenerated charge carriers, the photodetector shows ultrahigh EQE, responsivity and detectivity, reaching up to 71%, 4.7 × 102 mA W−1 and 9.5 × 1012 Jones, respectively, at zero bias in the 320–850 nm range. A fast response is observed with rise/decay times as low as 2/2 ms. The LDR values are over 80 dB. The performance characteristics are competitive with commercially available biased photodetectors and other reported heterojunction self-powered broadband photodetectors in the literature. In addition, a binary photoresponse is observed under small bias voltages. The heterostructures are fabricated by directly heteroepitaxially growing GaN microwires on patterned Si, enabling large-area device applications, and stand out from low-dimensional semiconductor photodetection systems. The overall high performance coupled with large-scale production makes GaN microwire array/Si heterojunctions promising for practical self-powered broadband photodetectors.