20 October 2011 in Human Factors and Ergonomics in Manufacturing & Service Industries
14 August 2014 in Ergonomics
Subjectively assessed endurance time (ET), resumption time (RT) and perceived discomfort, pain or fatigue (PD), and objectively measured maximum force-exerting capacity were investigated for varying loads and durations of a pushing task with two repeated trials. Beyond the main results quantifying how the load scenario affected ET, RT and PD, three additional results are of note: (1) although the maximum pushing force did not change between trials, shorter ET, longer RT and higher PD indicated accumulation of fatigue in Trial 2; (2) the PD ratings showed a trend with a linear increase during loading and a curvilinear decrease during recovery; and (3) the RT and the load level for different relative loading times were found to have an unexpected U-shaped relationship, indicating lowest fatigue at the intermediate load level. These results can be used to model a more sustainable and productive work-recovery ratio. Practitioner Summary: Sufficient recovery during a work-shift is important for sustainable work. This paper presents data from an empirical study on how fatigue reactions and recovery needs vary with load level and loading time and with one repeated loading. The results enable the modelling of work-recovery ratios to ensure adequate recovery during work-shifts.
10 January 2020 in Ergonomics
RAMP II is an observation-based tool developed for assessing a wide range of musculoskeletal disorder risk factors related to industrial manual handling. RAMP II, which is part of the RAMP tool, is based on research studies and expert judgments. The assessment relies mainly on direct or video observations of the work being assessed, but additionally on measured push/pull forces and weights of handled objects, and on perceived workload and discomfort. Over 80 practitioners participated in the development of the tool. According to the evaluations, 73% of the assessment items evaluated had acceptable reliability, and the majority of the potential end-users reported that RAMP II is usable for assessing risks and as a decision base. It is concluded that this study provides support that RAMP II is usable for risk assessment of musculoskeletal disorder risk factors in industrial manual handling. Practitioner Summary: RAMP II is an observation-based assessment tool for screening and assessing major musculoskeletal exposures in industrial manual handling jobs. Over 80 practitioners participated in the development of the tool. This study provides support that RAMP II is usable for risk assessment of musculoskeletal disorder risk factors in industrial manual handling.
1 July 2020 in Applied Ergonomics
In this paper the RAMP Package is presented with the objective to facilitate the application of the RAMP tool to systematically manage MSD risks. The package consists of the RAMP tool (Risk Assessment and Management tool for manual handling Proactively), the RAMP website, and free, globally available online, training courses (MOOCs). An Action module used for managing identified MSD risks is introduced. The tool, encompassing a wide range of risks, is applicable to the whole risk management process. Furthermore, RAMP is openly available for download, and free to use. The RAMP tool and training materials were developed using a participative iterative methodology including researchers and practitioners. RAMP was downloaded in 86 countries in the first 26 months since its' launch and over 2400 learners from high-, middle- and low-income countries have joined the MOOCs. The RAMP Package meets organisations' needs for an accessible, comprehensive risk assessment and management tool.
1 March 2000 in Ergonomics
This study investigated reactions in passively loaded, fully extended elbow joints in 13 men. Pain reactions during and after loading were studied, as were endurance time, T(end), and resumption time, Tr. The loading moment on the elbow joint, Mn, varied between 7 and 100% of maximum elbow moment. Discomfort/ pain was estimated with Borg's CR-10 scale. T(end) decreased with increasing load level. The opposite was found for the resumption time: the higher the load, held until T(end), the shorter the Tr. The pain limiting the working capability originated mainly from muscle tissue and not from the joint itself. It is concluded that the relation between load and endurance time for passively loaded, fully extended elbow joints resembles that for muscular loading in more 'normal' postures. Equations for estimation of endurance and resumption times (in minutes) for fully extended joints are proposed: T(end) = 20.6e(-6.04Mn) and Tr = 0.0167e(8.84/(1.46+0.346Mn)), respectively.
16 October 2017 in International Journal of Occupational Safety and Ergonomics
RAMP I is a screening tool developed to support practitioners in screening for work-related musculoskeletal disorder risk factors related to manual handling. RAMP I, which is part of the RAMP tool, is based on research-based studies combined with expert group judgments. More than 80 practitioners participated in the development of RAMP I. The tool consists of dichotomous assessment items grouped into seven categories. Acceptable reliability was found for a majority of the assessment items for 15 practitioners who were given 1 h of training. The usability evaluation points to RAMP I being usable for screening for musculoskeletal disorder risk factors, i.e., usable for assessing risks, being usable as a decision base, having clear results and that the time needed for an assessment is acceptable. It is concluded that RAMP I is a usable tool for practitioners.