One-dimensional (1D) boron nitride (BN) nanostructures with a high aspect ratio are of prime interest due to their importance in fundamental research and wide-range potential applications. Herein we developed a facile method for the first synthesis of ultrafine porous BN nanofibers in high purity and a high yield. The method included two-steps, freeze-drying of a hot melamine/boric acid solution and post pyrolysis of the as-obtained products. The extremely rapid cooling of the hot melamine/boric acid solution during the freeze-drying process resulted in the formation of ultrafine precursors, which was the key for the final synthesis of porous BN nanofibers with downsized diameters (20–60 nm) and high aspect ratios. The as-synthesized ultrafine BN nanofibers possessed a high specific surface area and a large pore volume, which could be tuned by the pyrolysis parameters. All of these characteristics make the porous BN nanofibers promising in the applications of water treatment, hydrogen storage, catalyst support, etc. Especially, ultrafast adsorption of methylene blue (MB) in water has been demonstrated using the present porous BN nanofibers as an adsorbent.
18 December 2017 in ACS Applied Materials & Interfaces
One-dimensional (1D) inorganic perovskite nanowires (NWs) have attracted promising attention for application in the fields of photodetection, lasers and lighting due to their outstanding optoelectronic properties. However the direct synthesis of highly pure all-inorganic perovskite NWs with well-defined morphologies and compositions still remains challenging. Here we report the controllable synthesis of brightly emitting cesium lead halide CsPbX3 (X = Cl, Br) NWs and their assembly into high-performance photodetector nanodevices. High quality CsPbX3 NWs have been directly synthesized via a solvothermal method without using post-synthetic anion-exchange reactions. The NWs are single-crystalline, with uniform diameters of ∼10 nm and lengths of up to tens of microns, showing ultra-high aspect ratios. Both CsPbCl3 and CsPbBr3 NWs show excellent photoluminescence (PL) characteristics with narrow emission spectra and high PL quantum yields (PLQYs). The photodetectors constructed on the CsPbX3 NWs and interdigital electrodes (with interdigitation widths up to 100 μm) exhibit promising photoelectric properties, achieving high switching ratios (5.8 × 103 for CsPbCl3 NW devices and 1.1 × 103 for CsPbBr3 NW devices) and fast response time. The present solvothermal approach is controllable, convenient, and is easily realized for quantifiable preparation, and can further promote the application of the all-inorganic perovskite NWs in the optoelectronic field.
1 February 2022 in Journal of Colloid and Interface Science