The reliability properties of NOR flash memory with 65nm node being developed in Samsung electronics are greatly improved by using the newly proposed re-oxidized tunnel oxide. Especially, by optimizing the process variables such as the re-oxidation thickness/time, the partial pressure of NO during annealing, and the kinds of re-oxidizing materials, the Vth shifts post cycling and after post-cycling bake were decreased to the level of 28% and 42% of conventional NO annealed tunnel oxide, respectively.
12 April 2018 in Japanese Journal of Applied Physics
In this study, a method to control the electrical performance of solution-based indium zinc oxide (IZO) thin film transistors (TFTs) is proposed by ultraviolet–ozone (UV–O 3 ) treatment on the selective layer during multiple IZO active layer depositions. The IZO film is composed of triple layers formed by spin coating and UV–O 3 treatment only on the first layer or last layer. The IZO films are compared by X-ray photoelectron spectroscopy, and the results show that the atomic ratio of oxygen vacancy (V O ) increases in the UV–O 3 treatment on the first layer, while it decreases on last layer. The device characteristics of the bottom gated structure are also improved in the UV–O 3 treatment on the first layer. This indicates that the selective UV–O 3 treatment in a multi-stacking active layer is an effective method to optimize TFT properties by controlling the amount of V O in the IZO interface and surface independently.