22 April 2016 in Geomechanics and Geophysics for Geo-Energy and Geo-Resources
15 October 2019 in Marine Georesources & Geotechnology
Sporosarcina pasteurii (ATCC 11859) is a nitrogen-circulating bacterium capable of precipitating calcium carbonate given a calcium source and urea. This microbially induced carbonate precipitation (MICP) is able to infill inter-granular porosity and act as a biological clogging agent, thus having a wide potential application in strengthening coastal foundations, preventing erosion by seas and rivers and in reducing sand liquefaction potential in coastal areas. A successful MICP application requires the understanding of the primary parameters that influence the microbially mediated process to achieve its engineering goals, such as injection scheme, chemical concentrations, retention times, and injection rates. However, the granular morphology has generally been oversimplified to ideal shape without enough consideration in previous studies. The following explores the critical micro-scale influence of particle morphology on mechanisms of microbially induced clogging. Spherical, non-spherical and angular particles were used as granular aggregates in permeating column experiments with the resulting permeability and calcium carbonate content of the treated aggregates examined. Microscopic examination (SEM) defines the features of the distribution of microbially precipitated calcium carbonate and the forms of clogging. The results show: (1) given a fixed duration of treatment, the calcium carbonate content for the spherical particle aggregate is significantly higher than that for near-spherical and angular particle aggregates; (2) for identical durations of treatment, the maximum permeability reduction occurs for angular particles (rather than for spherical particles with the highest carbonate content). This suggests that the microscopic distribution of calcium carbonate is significantly influenced by particle morphology, exerting a critical control in the effectiveness of clogging. SEM images indicate that the microbial calcium carbonate precipitates encapsulate the spherical particles as a near-uniform shell and occlude the pore space only by increasing the shell thickness. In contrast, the near-spherical and angular particles are only partially coated by a calcium carbonate film with scattered crystals of vaterite and calcite further clogging the void space. The polyhedral nature of the non-spherical particles tends to result in a slot-shaped pore structure which critically defines the hydraulic conductivity of the ensemble medium. As the microbial vaterite and calcite continue to accumulate on the particle surface, these slot-shaped pore structures become increasingly more tortuous – resulting in a noticeable reduction of permeability at a lower calcium carbonate content.
1 December 2018 in Journal of Natural Gas Science and Engineering
17 January 2024 in Geomechanics and Geophysics for Geo-Energy and Geo-Resources
The volume evolution behavior of rock fissures and the characteristics of acoustic emission under cyclic loading are critical for rock stability analysis. To study the volume change behavior of monzogranite fissures and the characteristics of acoustic emission signals under cyclic loading, we selected samples of monzogranite at − 1600 m from a gold mine located in the Jiaodong Peninsula at a depth of − 1600 m and investigated the samples using triaxial cyclic loading—unloading tests and acoustic emission monitoring. As the volume change behavior of the monzogranite fissures and acoustic emission signals were monitored and recorded, the calculated fracture volume strain ratio coefficient and acoustic emission entropy value were proposed to describe the evolution process of fissures inside the rock. The research results showed that the volume strain ratio curve of the rock fractures exhibited a logarithmic variation characteristic during the cyclic loading and unloading, and the fracture volume strain ratio better reflected the relative scale of the internal fracture strain in the rock to the total volume strain. The acoustic emission entropy value reflected the crack evolution behavior during the loading and failure processes, which was a rapid decline in the initial stage of loading and a rapid upward trend in the failure stage. The observed “V”-shaped change in the acoustic emission entropy can be used as an early warning for rock failure. The research results can provide theoretical guidance for rock stability analysis.
6 January 2021 in Energy Science & Engineering
Mylonite coal is a representative of tectonically deformed coal and is a result of crushing original coal into fine coal grains under strong shear or long‐low tectonic stress. Because of its granular nature and the resultant inferior mechanical property, it is difficult to initiate fluid‐driven fractures within mylonitic coal reservoirs for enhancing coalbed methane recovery. The following explores a biomineralization method of microbially mediated calcium carbonate precipitation (MICP) to enhance the structural integrity and mechanical strength of mylonitic coal, enabling potential success for hydrofracturing. The experimental results indicate that the mechanical properties of mylonite coal are significantly enhanced after a short period of MICP treatment with ten cycles of treatments yielding a maximum uniaxial compressive strength (UCS) of 8.7 MPa and a maximum brittleness index of 0.218 approaching that of the hard coal. The increments in UCS and brittleness of biocemented mylonite coal show a positive correlation with the generated calcium carbonate content. Scanning electron microscopy (SEM) imaging indicates that the generated calcium carbonate precipitates first randomly occur on the particle surfaces, and then occupies the interstitial space until particle‐particle bonds are developed. The irregular morphology of coal particles results in two contact relations between particles, point contact and planar contact, causing a significant difference in biocementation effectiveness. Two microfailure patterns of biocemented coal with uniaxial compression are observed. One is that the coal particles are crushed, and the other occurs at the biocemented interface between the coal particles and calcium carbonate crystals.