Ryan James Gasvoda

Ryan James Gasvoda

Auto-generated profile, based on publicly available information

Ryan James Gasvoda

Lam Research Corporation 2 , 11155 SW Leveton Drive, Tualatin, Oregon 97062

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 August 2020 in Journal of Vacuum Science & Technology A
Verified
Journal Article
Closed access
PDF file
RGRyan J. Gasvoda
Ryan J. Gasvoda
ZZZhonghao Zhang
Zhonghao Zhang
SWScott Wang
Scott Wang
EHEric A. Hudson
Eric A. Hudson
SASumit Agarwal
Sumit Agarwal
Continued downscaling of semiconductor devices has placed stringent constraints on all aspects of the fabrication process including plasma-assisted anisotropic etching. To address manufacturing challenges associated with atomic-scale control, material selectivity, etch fidelity, and increasingly complex device architectures, reactive ion etching (RIE) is transitioning to plasma-assisted atomic layer etching (ALE). Even though the number of elements used in the semiconductor devices has increased several-fold over the last four decades, SiO2 and SiNx remain the most commonly used dielectric materials. In fact, fluorocarbon based, plasma-assisted ALE processes for SiO2 and SiNx have already been integrated into semiconductor manufacturing, including etching of self-aligned contacts for advanced transistors. However, several challenges remain in achieving ultrahigh etch selectivity of SiO2 over SiNx and vice versa. In this article, first, the authors provide a focused review on selective RIE of SiO2 over SiNx and contrast this with ALE. A particular focus is given to the etching mechanism, including the role of the mixing layer composition and thickness at the fluorocarbon-SiO2 interface, the F-to-C ratio in the fluorocarbon parent gas, H2 dilution, surface composition on the nonetched SiNx, ion flux and energy, Ar plasma activation duration in ALE, and chamber memory effects. Second, we discuss the reverse case of selectively etching SiNx over SiO2 with careful attention given to the role of novel hydrofluorocarbon gases and dilution of the primary feed gas with other gases such as CH4 and NO. In the second part of this review, we also discuss how novel surface chemistries are enabled by the introduction of ALE, which include selective (NH4)2SiF6 formation on the SiNx surface and selective surface prefunctionalization of SiO2 to enable ultrahigh selectivity. Through this review, the authors hope to provide the readers with an exhaustive knowledge of the selectivity mechanisms for RIE of SiO2 over SiNx and vice versa, which provides a basis for developing future highly material-selective ALE processes.

28 August 2017 in ACS Applied Materials & Interfaces
Verified
Journal Article
Closed access
RGRyan J. Gasvoda
Ryan J. Gasvoda
ASAlex W. van de Steeg
Alex W. van de Steeg
RBRanadeep Bhowmick
Ranadeep Bhowmick
EHEric A. Hudson
Eric A. Hudson
SASumit Agarwal
Sumit Agarwal

28 August 2019 in Journal of Vacuum Science & Technology A
Verified
Journal Article
Open access
PDF file
RGRyan J. Gasvoda
Ryan J. Gasvoda
YVYuri G. P. Verstappen
Yuri G. P. Verstappen
SWScott Wang
Scott Wang
EHEric A. Hudson
Eric A. Hudson
SASumit Agarwal
Sumit Agarwal
The authors show that organic functionalization of an SiO2 surface can be used to controllably alter the etch per cycle during plasma-assisted atomic layer etching (ALE). The ALE process consisted of two half-cycles: CFx film deposition from a C4F8/Ar plasma and an Ar plasma activation step. The surface reactions, composition, as well as film thickness were monitored using in situ surface infrared spectroscopy combined with in situ four-wavelength ellipsometry. The SiO2 surface was prefunctionalized with bis(dimethylamino)dimethylsilane, which reacted with surface —SiOH groups in a self-limiting heterogeneous gas-solid reaction. After this reaction, the SiO2 surface was functionalized with Si—CH3 groups. ALE was performed on both as-deposited and functionalized SiO2 surfaces. Analysis of the infrared spectra after seven sequential ALE cycles on a bare SiO2 sample showed no accumulation of graphitic carbon on the SiO2 surface, and thickness measurements showed a net etch of ∼1.8 nm of SiO2. On the other hand, infrared spectra after seven sequential ALE cycles on the organically functionalized SiO2 surface clearly showed a buildup of graphitic hydrofluorocarbon on the surface. This graphitic hydrofluorocarbon film accumulated during each cycle, and after four cycles drastically reduced etching of SiO2 in later cycles. The overall etching of SiO2 after seven cycles was ∼1.0 nm. The infrared spectrum of this accumulation layer also shows intense Si—O—C and SiFx (x = 1, 2, 3) stretching vibrations, but CFx deposition on bare SiO2 shows weak intensity for the same features. Detailed analysis shows that the interface between CFx and SiO2 is atomically abrupt during ALE of bare SiO2 but has a high degree of mixing and covalent bonding in the etch-inhibiting graphitic fluorocarbon film that forms on the —CH3 functionalized SiO2 surface.

17 March 2021 in Langmuir
Verified
Journal Article
Closed access
RGRyan J. Gasvoda
Ryan J. Gasvoda
WXWanxing Xu
Wanxing Xu
ZZZhonghao Zhang
Zhonghao Zhang
SWScott Wang
Scott Wang
EHEric A. Hudson
Eric A. Hudson
SASumit Agarwal
Sumit Agarwal

16 December 2021 in Journal of Vacuum Science & Technology A
Verified
Journal Article
Closed access
PDF file
WXWanxing Xu
Wanxing Xu
RGRyan J. Gasvoda
Ryan J. Gasvoda
PLPaul C. Lemaire
Paul C. Lemaire
KSKashish Sharma
Kashish Sharma
DHDennis M. Hausmann
Dennis M. Hausmann
SASumit Agarwal
Sumit Agarwal
Area-selective atomic layer deposition (ALD) of dielectrics on chemically similar growth and nongrowth surfaces is very challenging. In this study, we use aminosilane inhibitors to achieve selective blocking of ALD of Al2O3 on plasma-deposited SiO2 versus plasma-deposited SiNx. The SiO2 and SiNx surfaces were exposed to bis(dimethylamino)dimethylsilane followed by (N,N-dimethylamino)trimethylsilane through the vapor phase at 150 °C. At the same substrate temperature, Al2O3 films were grown by ALD using dimethylaluminum isoproxide and H2O. In situ surface infrared spectroscopy shows that aminosilane inhibitors react with almost all the surface −SiOH groups on SiO2, but reaction with surface −NHx groups on the SiNx surface is incomplete, thereby leaving potential growth sites for ALD of Al2O3. In situ ellipsometry results shows that a ∼2.7 nm Al2O3 film can be selectively deposited on SiNx versus SiO2. Upon exposure of the plasma-deposited SiNx to the atmosphere, a higher attachment of aminosilanes and longer nucleation delay during the ALD of Al2O3 were observed, indicating the need to remove the native surface oxynitride prior to functionalization. This study shows that while fully passivating the nongrowth surface is necessary for achieving growth inhibition, ALD can initiate on a partially passivated growth surface.

8 March 2021 in Journal of Vacuum Science & Technology A
Verified
Journal Article
Closed access
PDF file
WXWanxing Xu
Wanxing Xu
PLPaul C. Lemaire
Paul C. Lemaire
KSKashish Sharma
Kashish Sharma
RGRyan J. Gasvoda
Ryan J. Gasvoda
DHDennis M. Hausmann
Dennis M. Hausmann
SASumit Agarwal
Sumit Agarwal
The mechanism for growth initiation on the nongrowth surface during area-selective atomic layer deposition (ALD) processes is not well understood. In this study, we examine the ALD of ZrO2 on a SiO2 surface functionalized with alkylated-aminosilane inhibitors delivered from the vapor phase. ZrO2 films were deposited by ALD using tetrakis(ethylmethylamino)zirconium(IV) with H2O as the coreactant. In situ surface infrared spectroscopy shows that aminosilane inhibitors react with almost all the surface —SiOH groups on the SiO2 surface by forming Si—O—Si bonds. In situ four-wavelength ellipsometry shows that no ZrO2 growth occurs on the functionalized SiO2 during the first few ALD cycles, but growth eventually initiates after a few ALD cycles. We speculate that after repeated exposure of the functionalized SiO2 surface to Zr precursors, in the absence of surface —SiOH groups, growth initiates due to either reaction of the precursors with strained Si—O—Si bonds or through a strongly physisorbed state. These reaction pathways are usually not relevant in ALD reactions on the unprotected —SiOH-terminated SiO2 surface due to a higher activation energy barrier, but become relevant on the passivated surface as a result of repeated precursor exposure. Thus, this study highlights the importance of steric blocking of these higher activation energy barrier reaction pathways.