Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
In this work, an in-depth analysis concerning the transmission performance of IEEE802.11g/n WiFi signals in a radio-over-fiber system is presented. Low-cost optical/electrical transceivers based on 850 nm vertical cavity surface emitting lasers (VCSELs) and PIN photodiodes are considered. System modelling includes the impact of noise generated in the optical path, such as relative intensity noise (RIN), shot noise, photodetector thermal noise, clipping and intermodulation distortion. Analytic results based on Volterra series analysis for the performance of the system in terms of SNR and EVM for several optical modulation index values are obtained. The theoretical analysis is also compared with experimental results. Among several conclusions, it is observed that the laser intermodulation distortion, clipping and RIN are the most relevant factors.
The analysis of a subcarrier multiplexing free space optical transmission system with ASK electrical modulation is presented in this paper. The designed system based on SCM-ASK-FSO allows the optimized exploration of the available spectral frequency bandwidth. The performance for the SCM - FSO subsystem obtained using ASK electrical modulation was evaluated in terms of eye diagram and bit error rate. It was verified that the FSO channel does not generate intermodulation between the subcarriers, allowing a uniform interchannel spacing. The necessity of the channel insertion was evaluated as a function of the reduction in the distance between the system transceivers. SCM techniques integrated to a FSO system operating at 1550 nm were simulated with the commercial software Optisystems from Optiwave, Inc.
1 January 2024 in Journal of Microwaves, Optoelectronics and Electromagnetic Applications
This work presents the development of a refractive index sensing methodology for measuring carbon dioxide concentrations, considering the effect of temperature environment. We propose and demonstrate, using simulations, the use of tapered and coated Long Period Gratings as a way to enhance the refractive index sensitivity. In addition, artificial neural networks were used to improve the estimation of carbon dioxide concentration, considering the crosssensitivity effect with temperature.
A new all optical orthogonal frequency division multiplexing architecture based on a Mach-Zehnder interferometer is proposed. Our results shows a throughput of 1.28 Tbps over 100 km of single mode fiber witch is suitable for long reach NG-PON2 applications.
This work develops a continuous wave numerical model based on the spatial propagation of the pumps and signals into the optical fibre in a Raman amplification scheme that can be helpful to predict the behavior of different architectures in a remote optical fiber sensor system based on a long period grating. The numerical model is validated by experimental results and is applied in the analysis of the noise generated by Raman amplification in the remote optical sensors systems. After that, the numerical model is applied to analyze the most viable architecture to be implemented in an experimental measure in the temperature remote optical sensor with 50 km distance between the central unit and the sensor head. An electrical interrogation scheme is used due their low cost and good time response. The simulation results show 2,8 dB improvement in OSNR estimation for an optical amplification scheme using two optical fibers instead of only one for the same distance length.