We report on the characterization of Zeonex polymer in the terahertz (THz) region and the fabrication and characterization of a microstructured polymer fiber made of Zeonex. We demonstrate single-mode propagation with highly efficient coupling into the fiber close to the theoretical limit of 80% using specially designed lenses. The THz time domain measurements allow the loss and dispersion properties of the fiber to be determined, showing that for the current fiber the losses are only caused by the material loss. The phase refractive index is calcu lated from experimental data and compared to values predicted by scalar and vectorial simulations. Results for the dispersion parameter for a THz microstructured fiber are presented for the first time to our knowledge.
We demonstrate single mode terahertz (THz) guidance in hollow-core kagome microstructured fibers over a broad frequency bandwidth. The fibers are characterized using a THz time-domain spectroscopy (THz-TDS) setup, incorporating specially designed THz lenses to achieve good mode overlap with the fundamental mode field distribution. Losses 20 times lower than the losses of the fiber material are observed in the experiments, as well as broad frequency ranges of low dispersion, characteristic of hollow-core fibers.
Electromagnetic metamaterials attract much attention since they can be engineered to exhibit optical properties not found in nature. Their fabrication, however, is challenging, especially in volume. We introduce drawing as a means of fabricating metamaterials, thus demonstrating a terahertz metamaterial. We codraw polymethyl-methacrylate and indium, producing several meters of metamaterial with wire diameters down to , and lattice constants of . We experimentally characterize the transmission properties of different samples, observing high-pass filtering between 0.3–0.4 THz, in good agreement with simulations.
20 May 2016 in Journal of the Optical Society of America B
We numerically study, by means of the single envelope equation, the generation of optical frequency combs ranging from the visible to the mid-infrared spectral regions in resonators with quadratic and cubic nonlinearities. Phase-matched quadratic wave-mixing processes among the comb lines can be activated by low-power continuous wave pumping in the near infrared of a radially poled lithium niobate whispering gallery resonator. We examine both separate and coexisting intracavity doubly resonant second-harmonic generation and parametric oscillation processes and find that modulation instabilities may lead to the formation of coupled comb arrays extending over multiple octaves. In the temporal domain, the frequency combs may correspond to pulse trains or even to a single pulse circulating in the cavity.
We report on the characterization of 3D-printed hollow core Terahertz waveguides with metal wire inclusions over a frequency range of 0.2-1.0 THz using standard THz time-domain spectroscopy. We observe single-mode broadband THz propagation in these waveguides, and measure the loss coefficient and the mode effective phase index. Our measurement data agree well with predicted values obtained from numerical simulations.
We experimentally demonstrate broadband terahertz (THz) pulse propagation through hollow core fibers with two or four embedded Indium wires in a THz time-domain spectroscopy (THz-TDS) setup. The hybrid mode is guided in the air core region with power attenuation coefficients of 0.3 cm−1 and 0.5 cm−1 for the two-wire and four-wire configurations, respectively.