The irradiance distribution on a concentration photovoltaic cell that produces maximum conversion efficiency has been found with the tools of Variational Calculus. The analysis is two dimensional and can be applied to a comb-like double busbar solar cell illuminated by a line-focus concentrator. The optimum distribution is, in general, nonuniform, and depends on the internal parameters of the solar cell: the higher the contribution of the grid to the global cell series resistance, the lower the uniformity of the optimum irradiance distribution. In practical cases, the efficiency for uniform illumination is close to that of the optimum, but in the latter the irradiance close to the busbar may be noticeable higher than the average.
Compared to conventional, rotationally-symmetric optics, free-form optics provide additional degrees of freedom that enable special geometrical and performance features. For instance, in AR and VR, some approaches based on free-forms have shown their ability to reduce the display to pupil distance (total track length, or TTL), to increase the Field of view (FOV) or to improve the apparent resolution of the VR scene. This work will discuss different forms to treat design problems with free-forms, ranging from the direct calculation of point-clouds using the so-called SMS method (followed by a NURBS representation of results) to the combination of direct calculation + optimization. In the latter approach, different types of polynomial descriptions of the free-form surfaces will be considered, with special emphasis on the importance of using a basis that is orthogonal, either with a sag metric or a gradient one.