18 December 2017 in IEEE Transactions on Industrial Electronics
The linear induction motor (LIM) drive in linear metros suffers heavily from low efficiency due to its large air-gap length and the partial load conditions, where high loss appears in both the LIM and the inverter when a constant excitation current is generally required. Worse still, the end-effects, including both the transversal edge-effect and longitudinal end-effect, would lead to the decrease of magnetizing inductance and the increase of secondary resistance, resulting in extra loss and further deterioration of drive efficiency. To reduce the loss of the LIM drive, this paper proposes a novel loss model based loss minimization control (LMC) scheme for LIM drives. First, in the equivalent circuit and the mathematical model of LIM, four coefficients are introduced to evaluate the influence of the end-effects. Based on a thorough analysis of the LIM copper and core losses, together with the inverter conduction and switching losses, a novel integrated loss model of LIM drive is then developed, and an improved LMC scheme to obtain the optimal solution online is proposed to minimize the loss of the LIM drive. The proposed control method is successfully implemented in a 3-kW LIM drive prototype. The effectiveness of the proposed method is validated by the experimental results.
17 August 2018 in IEEE Transactions on Power Electronics
Flux estimation is of great importance for high performance linear induction motor (LIM) drives. However, due to the end effects of LIMs, the mutual inductance and secondary resistance are seriously varied with the operation condition changing, and the flux estimation suffers from these LIM parameter variations. To alleviate the influence of these parameter variations, this paper proposes a new flux estimation algorithm based on two improved extended state observers (ESOs) with expanded bandwidth for observing disturbances. One of them is specially designed to observe the ac disturbance at certain frequency. Taking advantage of the improved ESOs, the robustness of the flux observer to parameter deviations can be significantly strengthened, and the vector control strategy based on this new flux observer can achieve better dynamic performance. Lastly, the effectiveness of the proposed method is validated by both simulation and experimental results on an LIM prototype.
18 November 2019 in IEEE Transactions on Vehicular Technology
Due to the large air gap length, severe end effects, and the light load operating conditions during cruising, the efficiency of linear induction motors (LIMs) applied in urban transit, i.e. linear metro, is usually quite low. In order to overcome this drawback, this manuscript makes a comprehensive efficiency optimization to LIM efficiency from both motor design and control aspects. On the one hand, by analyzing the effects of different parameters on LIM performance, eight main parameters are selected as the optimization variables to achieve the optimal design of LIM through genetic algorithm (GA), so as to realize higher efficiency at rated operation point. On the other hand, considering the LIM still with low efficiency under light load, an optimal efficiency control (OEC) based on an integrated loss model, which contains both motor and inverter losses, is presented to promote the operating efficiency of LIM drive system in the whole operation area. Finally, the comprehensive efficiency optimization results are validated by related experiments on basis of one 3 kW prototype.
6 August 2018 in IEEE Transactions on Vehicular Technology
This paper proposes an improved systematic approach for sensorless speed estimation and controller design of a linear induction machine (LIM) for linear metro drives. A novel speed estimation method based on the extended state observer is developed to improve the dynamic speed estimation response. In contrast to the conventional proportional-integral speed adaptive mechanism based only on the LIM electromagnetic model, this new speed estimation method incorporates both the electromagnetic and mechanical models such that it can estimate the LIM speed and load resistance at the same time. A new speed controller incorporating the disturbance observer based control algorithm is developed to strengthen the speed tracking ability and suppress the disturbance of load variation. Having fewer parameters, it brings great convenience to the drive system parameter setting and tuning. The performance of the proposed method is numerically simulated and experimentally verified.
4 October 2018 in IEEE Transactions on Industry Applications
Linear induction machine (LIM) in urban transit suffers greatly from poor efficiency due to the large air-gap length and the end-effects, including both transversal edge- and longitudinal end-effects caused by the cut-open magnetic circuit and different width between primary and secondary. Besides, the unique normal force existing in LIM that could be as high as four times of the thrust, would create undesired additional resistance force and power loss, bending of the guide way, and tire wear. Addressing on these issues, this paper proposes a novel loss minimization control (LMC) strategy for LIM to reduce the steady-state loss and normal force simultaneously. Firstly, an improved loss model of LIM is proposed on basis of the analysis of LIM copper and core loss. Secondly, the LIM normal force including both attractive and repulsive components is modelled in the same manner as loss model. Thirdly, a novel loss minimization cost function is set up, based on which the optimal solution is obtained through both analytical and numerical approaches, and thus an improved LMC strategy is carried out to achieve the minimization of steady-state loss and normal force at the same time. The proposed method is comprehensively investigated on one 3 kW arc induction machine (one prototype for actual LIM), and its effectiveness is fully validated through both simulation and experimental results.
12 June 2018 in IEEE Transactions on Magnetics
Doubly salient permanent magnet machine (DSPMM) has received extensive attentions recently due to its simple structure, high reliability, high torque density, etc. An improved 4/4 stator/rotor single-phase asymmetric-stator-pole DSPMM is proposed in this paper. First, it has investigated the topologies and operating principle based on torque expression and graphical description. Then, the effect of key structure parameters on torque is studied based on the 2-D finite-element algorithm. And then, comprehensive comparison on electromagnetic torque for the original and new machines is made. Finally, one prototype for the improved structure is manufactured and tested. It indicates that lower cogging torque, lower torque ripple, and stronger starting capability can be obtained by the improved structure. The theoretical results are well validated by comprehensive experiments.