Application-specific requirements for future lighting, displays and photovoltaics will include large-area, low-weight and mechanical resilience for dual-purpose uses such as electronic skin, textiles and surface conforming foils. Here we demonstrate polymer-based photovoltaic devices on plastic foil substrates less than 2 μm thick, with equal power conversion efficiency to their glass-based counterparts. They can reversibly withstand extreme mechanical deformation and have unprecedented solar cell-specific weight. Instead of a single bend, we form a random network of folds within the device area. The processing methods are standard, so the same weight and flexibility should be achievable in light emitting diodes, capacitors and transistors to fully realize ultrathin organic electronics. These ultrathin organic solar cells are over ten times thinner, lighter and more flexible than any other solar cell of any technology to date.
Inverted organic photovoltaic devices based on a blend of poly(3-hexylthiophene) and a fullerene have been developed by inserting a solution-processed ZnO interlayer between the indium tin oxide (ITO) electrode and the active layer using Ag as a hole-collecting back contact. Efficient electron extraction through the ZnO and hole extraction through the Ag, with minimal loss in open-circuit potential, is observed with a certified power conversion efficiency of 2.58%. The inverted architecture removes the need for the use of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) as an ITO modifier and for the use of a low-work-function metal as the back contact in the device.