Solid-state optical beam steering devices desire a large field of view (FOV), good beam quality, and reconfigurable beamforming of complex patterns, which are not available in a single system yet. Having not been demonstrated, an active beamformer using an optical phased array (OPA) could potentially fulfill these requirements simultaneously, because it can control both the wavefront and beam pattern. Half-wavelength-pitch OPAs theoretically can achieve the three requirements concurrently, but suffer from crosstalk. Most previous efforts focus on mitigating/avoiding crosstalk. Instead, here we appreciate its existence and propose/demonstrate a programmable architecture to compensate for it. Using a tree of composite variable splitters with a full splitting-ratio range, we achieve arbitrary amplitude/phase modulation to pre-correct scrambled phase/amplitude by crosstalk. With comprehensive stray-light minimization strategies, the sidelobe suppression ratio (SLSR) is significantly improved. Our design achieves a 180∘ FOV, a peak SLSR of 24 dB, and complex-pattern beamforming simultaneously in a half-wavelength-pitch 64-waveguide array. Within the ±60∘ range, a SLSR of >20dB is achieved. Our OPA demonstrates Bayliss difference, pulse-shaped, and asymmetric three-beam patterns with high SLSRs of >20dB, ∼10dB, and >18dB, respectively. These performance metrics are important for various applications in light detection and ranging, imaging, and communication.
Frequency-modulated continuous-wave (FMCW) ranging is essential for LiDAR and fiber-optic sensing, and its photonic integration requires on-chip lasers with wide mode-hop-free tuning and highly linear frequency sweeps. However, existing integrated lasers fall short of these requirements, restricting ranging performance to the centimeter scale. Here, we demonstrate a hybrid integrated external-cavity laser based on III–V and Si3 N 4 platforms that overcomes these limitations. By optimizing the cavity length and thermal tuning electrodes, the laser achieves a 102.4 GHz mode-hop-free tuning range and an intrinsic linewidth below 1.2 kHz. We further develop an unambiguous frequency-recovery algorithm using a 3×3 interferometer, enabling real-time frequency estimation and substantially improving sweep linearity. With pre-distortion compensation, we obtain a frequency-sweep nonlinearity of 2.36×10 −9 at a 50 Hz chirp rate. FMCW ranging experiments demonstrate a 3.2 mm resolution and a 0.37 mm precision over a 28 m fiber link, representing nearly an order-of-magnitude improvement over state-of-the-art integrated systems. These results offer a promising pathway toward high-precision LiDAR, fiber sensing, and biomedical imaging applications.
Spectral scanning, which utilizes the dispersive effect of light, is a simple and robust method for solid-state beam steering in light detection and ranging (LiDAR) applications. Powered by a tunable laser source, optical frequency-domain reflectometry (OFDR) is a high-precision measurement scheme that is inherently compatible with spectral scanning. Here, we propose a spectral-scanning LiDAR based on OFDR technology and demonstrate that, by connecting the measured spectral reflectivity and group delay of the targets with the dispersion equation, their cloud point data can be obtained. Moreover, compared to the spectral-scanning LiDAR based on the frequency-modulated continuous-wave (FMCW) ranging method, our proposed LiDAR scheme offers a more than tenfold improvement in range resolution with a large number of angular pixels. This enhancement enables high-resolution 3D imaging along both the angular and range axes.
A 90° optical hybrid was implemented on a silicon-on-insulator (SOI) platform using a reconfigurable optical neural network (ONN), composed of cascaded four-port multimode interferometers (MMIs). This programmable network enables customized system transfer matrices by training the input–output mapping of the network to match a target matrix, eliminating reliance on the precise splitting ratios and relative phases of individual components. This approach enhances the robustness of the system against fabrication and design variations. Even after introducing error matrices to the MMIs, the network still achieved an average phase error of 0.26° and an average common-mode rejection ratio (CMRR) of −30.8dB, demonstrating strong resilience to device-level imperfections. Moreover, the network architecture can adaptively compensate for output port coupling imbalances during training, effectively addressing the high sensitivity of the coupling process to port alignment and fabrication nonuniformity. This significantly reduces the complexity of optical packaging. We performed simulations to analyze the necessity of using networks with more than four layers and to evaluate the system’s ability to compensate for imbalances in output coupling coefficients. The average worst-case phase error was 0.24°, and the average worst-case CMRR was −34.2dB. Notably, these results showed no significant degradation with increasing coupling imbalance at the output ports. In addition, in our experiments, we demonstrated that a four-layer ONN can achieve a maximum phase error below 1.32° and a maximum CMRR better than −36.6dB at the target wavelength after training.
The performance of nanophotonic devices is often limited by discrepancies between ideal design and fabricated structures, especially in the presence of fabrication-induced nonidealities such as etch lag, where the etch depth depends on local feature size. Here, we propose a fabrication-aware inverse design framework that explicitly incorporates process-dependent structural variations into the design loop via an experimentally calibrated mapping between etch depth, feature size, and etch time. Using silicon grating couplers (GCs) as a representative platform, we show that neglecting etch lag leads to spectral shifts and efficiency degradation, while the proposed approach effectively compensates for such effects and improves simulation–experiment agreement. Under a standard 220 nm silicon-on-insulator (SOI) platform with a single shallow-etch process and without back-reflectors, a maximum measured coupling efficiency of 57.7% (≈ −2.39 dB) at 1550 nm is achieved. Tolerance analyses further show that the resulting designs maintain stable performance under the examined fabrication variations and fiber misalignment conditions.