4 December 2017 in Nanophotonics
The emergence of silicon photonics over the past two decades has established silicon as a preferred substrate platform for photonic integration. While most silicon‐based photonic components have so far been realized in the near‐infrared (near‐IR) telecommunication bands, the mid‐infrared (mid‐IR, 2–20‐μm wavelength) band presents a significant growth opportunity for integrated photonics. In this review, we offer our perspective on the burgeoning field of mid‐IR integrated photonics on silicon. A comprehensive survey on the state‐of‐the‐art of key photonic devices such as waveguides, light sources, modulators, and detectors is presented. Furthermore, on‐chip spectroscopic chemical sensing is quantitatively analyzed as an example of mid‐IR photonic system integration based on these basic building blocks, and the constituent component choices are discussed and contrasted in the context of system performance and integration technologies.
27 November 2013 in Nanophotonics
16 April 2009 in Journal of the Optical Society of America B
We propose a design tool for dielectric optical resonator-based biochemical refractometry sensors. Analogous to the widely accepted photodetector figure of merit, the detectivity , we introduce a new sensor system figure of merit, the time-normalized sensitivity , to permit quantitative, cross-technology-platform comparison between resonator sensors with distinctive device designs and interrogation configurations. The functional dependence of on device parameters, such as resonant cavity quality factor (Q), extinction ratio, system noise, and light source spectral bandwidth, is evaluated by using a Lorentzian peak fitting algorithm and Monte Carlo simulations to provide theoretical insights and useful design guidelines for optical resonator sensors. Importantly, we find that critically depends on the cavity Q factor, and we develop a method of optimizing sensor resolution and sensitivity to noise as a function of cavity Q factor. Finally, we compare the simulation predictions of sensor wavelength resolution with experimental results obtained in resonators, and good agreement is confirmed.
1 January 2007 in Optics Express
We have fabricated and tested, to the best of our knowledge, the first microfluidic device monolithically integrated with planar chalcogenide glass waveguides on a silicon substrate. High-quality Ge23Sb7S70 glass films have been deposited onto oxide coated silicon wafers using thermal evaporation, and high-index-contrast channel waveguides have been defined using SF6 plasma etching. Microfluidic channel patterning in photocurable resin (SU8) and channel sealing by a polydimethylsiloxane (PDMS) cover completed the device fabrication. The chalcogenide waveguides yield a transmission loss of 2.3 dB/cm at 1550 nm. We show in this letter that using this device, N-methylaniline can be detected using its well-defined absorption fingerprint of the N-H bond near 1496 nm. Our measurements indicate linear response of the sensor to varying N-methylaniline concentrations. From our experiments, a sensitivity of this sensor down to a N-methylaniline concentration 0.7 vol. % is expected. Given the low-cost fabrication process used, and robust device configuration, our integration scheme provides a promising device platform for chemical sensing applications.
4 February 2019 in Applied Physics Letters
We demonstrate a monolithic waveguide sensor integrated with a detector on-chip for mid-infrared absorption spectroscopic sensing. The optical sensing element comprises a chalcogenide glass spiral waveguide, and the detector is a PbTe photoconductor integrated directly with the chalcogenide waveguide. The limit of detection of the sensor for methane gas was experimentally assessed to be 1% by volume. Further optimization of the fabrication process and normalization of the laser power fluctuations should result in a maximum sensitivity of 330 ppmv.
1 January 2007 in Optics Express
We demonstrate, for the first time to the best of our knowledge, low-loss, Si-CMOS-compatible fabrication of single-mode chalcogenide strip waveguides. As a novel route of chalcogenide glass film patterning, lift-off allows several benefits: leverage with Si-CMOS process compatibility; ability to fabricate single-mode waveguides with core sizes down to submicron range; and reduced sidewall roughness. High-index-contrast Ge23Sb7S70 strip waveguides have been fabricated using lift-off with excellent uniformity of loss propagation and the lowest loss figure of reported to date. We also show that small core Ge23Sb7S70 rib waveguides can be fabricated via lift-off as well, with loss figures lower than 0.5 dB/cm. Additionally, we find through waveguide modal analysis that although overall transmission loss is low, the predominant source of this loss comes from scattering at the sidewalls.