Hexagonal boron nitride is shown to exhibit very significant persistent photoconductivity after UV illumination. This behavior can be initiated by sub-bandgap or close to bandgap illumination. Neither temperature nor pressure affects the buildup of photoinduced carriers. The effect persists at least for months at room temperature and is maintained significantly after heating up to 300 °C. Up to six orders of magnitude increased conductivity has been durably established in the devices, and the effect is reproducible. Double exponential fitting gives time constants up to 4600 days. Irradiation after having saturated the devices is shown to drastically reduce the decay rate. The bulk origin of such effect has been demonstrated. p-hBN/n-AlGaN diodes based on magnesium doped h-BN have been used to determine the type of conductivity through studies of junction capacitance variations under UV irradiation. Depending on illumination wavelength, both n- and p-type durable photoinduced carriers can be produced. These results are of interest for UVC LEDs in which the usual conductive AlGaN layers are still a hurdle toward efficient UV emitters.
P-hBN/n-AlGaN heterojunctions were fabricated using a dry-selective lift-off/transfer of Mg-doped hexagonal boron nitride (hBN) layer on top of n-AlGaN. Electrical contacts were used as mechanical stressors to provide structural rigidity to hBN layers as well as enabling selective lift-off. These junctions exhibit a rectifying behavior with a rectification ratio of approximately 3 × 105 at 3 V. When junctions were forward biased, ultraviolet (UV) emission around 262 nm was measured. This emission corresponds to recombinations in the n-AlGaN layer, demonstrating good hole injection in the structure. Full light emitting diode (LED) structures were fabricated by integrating UV multi quantum wells (MQWs) into these junctions. Produced UV LEDs emit around 290 nm serving as a proof of concept for future layer transferred p-hBN/MQWs/n-AlGaN structures in which the Al content is increased to go toward deep ultraviolet (DUV) emission. The selective pick and place process used to build these LEDs has multiple advantages. First, it allows independent optimization of the p-side as well as of the n-side, which includes the quantum wells. Second, UV MQWs are protected from the high temperatures needed for high hBN material quality growth, and thus their thermal stability is not affected.
Solid state semiconductor based neutron detectors have the potential to be energy efficient and compact, making them suitable for applications where low power consumption and size constraints are important considerations. Herein, neutron detection devices based on PIN structures consisting of BGaN/GaN superlattice (SL) are demonstrated. These SL structures enable to incorporate significant boron (B) content and achieve good crystalline quality epilayers crucial for better neutron detection. Further, by leveraging the built‐in electric field generated by the PIN structure, these devices can be operated without any applied bias, simplifying overall operation and enabling a more compact size system for detection. Their performance is evaluated by measuring real‐time current response under neutron irradiation (IN) and without it (ID). The neutron induced current density (ΔJ = JN − JD) is determined, reaching an impressive value of 0.67 pA cm−2 (two times JD) under thermal neutron flux of 1.2 × 104 n cm−2 s−1 without biasing, demonstrating their self‐powered capability. They exhibit a linear response to varying thermal neutron flux levels. Additionally, the detectors successfully detect low thermal neutron fluxes down to 300 n cm−2 s−1, showcasing their potential for diverse applications, including in low neutron environments, screening nuclear warheads, and preventing illegal trafficking of radiological materials.
We report broadband electroluminescence spanning from the infrared to the ultraviolet in a p-hexagonal boron nitride (hBN)/n-AlGaN tunneling heterojunction. By circumventing the need for n-type hBN, this heterostructure enables efficient electrical excitation of hBN defect states through resonant tunneling-mediated carrier injection. Bias-controlled alignment of defect levels leads to the progressive activation of multiple defect-related emission bands, while AlGaN band-to-band emission appears only at the highest forward biases. The results establish resonant tunneling as a robust mechanism for electrically driven, voltage-tunable light emission in hBN.