Zhengbo Jiang

Zhengbo Jiang

Auto-generated profile, based on publicly available information

Zhengbo Jiang

School of Information Science and Engineering, Southeast University, Nanjing, China

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 January 2021 in IEEE Journal of Microwaves
Verified
Journal Article
Open access
Wei HongWei Hong
Wei Hong
ZJZhi Hao Jiang
Zhi Hao Jiang
CYChao Yu
Chao Yu
DHDebin Hou
Debin Hou
HWHaiming Wang
Haiming Wang
JZJian Yi Zhou
Jian Yi Zhou
Ever since the deployment of the first-generation of mobile telecommunications, wireless communication technology has evolved at a dramatically fast pace over the past four decades. The upcoming fifth-generation (5G) holds a great promise in providing an ultra-fast data rate, a very low latency, and a significantly improved spectral efficiency by exploiting the millimeter-wave spectrum for the first time in mobile communication infrastructures. In the years beyond 2030, newly emerged data-hungry applications and the greatly expanded wireless network will call for the sixth-generation (6G) communication that represents a significant upgrade from the 5G network – covering almost the entire surface of the earth and the near outer space. In both the 5G and future 6G networks, millimeter-wave technologies will play an important role in accomplishing the envisioned network performance and communication tasks. In this paper, the relevant millimeter-wave enabling technologies are reviewed: they include the recent developments on the system architectures of active beamforming arrays, beamforming integrated circuits, antennas for base stations and user terminals, system measurement and calibration, and channel characterization. The requirements of each part for future 6G communications are also briefly discussed.

10 June 2020 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
YCYu-Yan Cao
Yu-Yan Cao
YWYiwen Wu
Yiwen Wu
ZJZhengbo Jiang
Zhengbo Jiang
Zhang-cheng HaoZhang-cheng Hao
Zhang-cheng Hao
A compact planar directional coupled crossover with a wide fractional bandwidth is proposed in this letter, which is composed of overlapping planar 3-dB couplers based on the substrate integrated waveguide (SIW) and stripline techniques. In the proposed structure, the TE10 mode and TEM mode can be transmitted simultaneously without any interaction, which is helpful to design and integrate the SIW and stripline couplers for realizing a wideband directional coupled crossover with a compact footprint. A prototype with a center frequency of 26 GHz for 5G applications is designed and fabricated. The experimental results show that the measured crossover has high isolation among all ports and good directional coupling performance in orthogonal directions. The proposed crossover has a compact footprint and low loss, which can be a good candidate for developing the miniature feeding networks for multiple beam antennas.

15 May 2020 in IEEE Transactions on Terahertz Science and Technology
Verified
Journal Article
Closed access
YWYiwen Wu
Yiwen Wu
ZJZheng-Bo Jiang
Zheng-Bo Jiang
Zhang-cheng HaoZhang-cheng Hao
Zhang-cheng Hao
This letter proposes a 400-GHz leaky-wave antenna (LWA) with low sidelobe level (SLL) and low cross-polarization level (CPL). Tapered radiation slots are designed for achieving a low SLL, virtual electrical walls are deployed to remove the loss from metal sidewalls by using a high-order mode feeding network, and a symmetrical layout with alternative-phase excitations is adopted for the array to suppress the CPL. The conventional computer numerical controlled (CNC) metal-milling and printed-circuit-board (PCB) processes are used to fabricate the designed prototype. Experiments are carried out to verify the design. The measured peak gain and radiation efficiency of the fabricated prototype are 21.32 dBi and 34.65% at 395 GHz, respectively. In addition, its measured SLL and CPL are about -25 dB and -30 dB, respectively. The proposed antenna shows merits of the low cost, low SLL and CPL performance for potential terahertz applications.

14 December 2023 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
CDChen-Yu Ding
Chen-Yu Ding
Zhang-cheng HaoZhang-cheng Hao
Zhang-cheng Hao
ZMZhuo-Wei Miao
Zhuo-Wei Miao
YWYiwen Wu
Yiwen Wu
DSDe-Ming Sun
De-Ming Sun
ZJZhengbo Jiang
Zhengbo Jiang
This paper presents a 220 GHz planar high-gain slot array (SA) antenna with an integrated Fabry-Perot cavity (FPC). The sophisticated SA is fabricated by low-cost printed-circuit-board (PCB) technology, and a FPC structure is used to improve the gain. In contrast to the conventional FPC which requires large air gaps between feed and partial reflective surface (PRS), the proposed PRS is integrated with SA on double sides of a single substrate, resulting in a more compact and stable architecture. By using PCB and integrated FPC technology, the gain of this antenna can be 1.2 dB higher than a pure metal SA with the same scale, while the cost is much lower, and the profile increases slightly. For verification, a 220 GHz prototype is designed, fabricated and measured. The simulated peak aperture efficiency (AE) is 69%, the experiments show a peak gain of 30.1 dBi and a total efficiency (TE) of 38.3%. The 3-dB gain bandwidth is 3.2%. Compared with congener sub-THz planar antennas using low-cost fabrication methods, this antenna can remain a relatively high AE and TE under the high gain (more than 30 dBi) condition, which can be a good candidate for terahertz wireless applications.

3 December 2024 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
FXFeng Xie
Feng Xie
Zhang-cheng HaoZhang-cheng Hao
Zhang-cheng Hao
ZLZekun Li
Zekun Li
JZJia-Ying Zhang
Jia-Ying Zhang
ZGZi-Jun Guo
Zi-Jun Guo
Wei HongWei Hong
Wei Hong
In this article, we develop a 220-GHz planar triangular lattice transmitter (TX) array for achieving a super high effective isotropic radiated power (EIRP), addressing the challenges associated with long-distance and high-data-rate wireless communication in the terahertz (THz) band. Due to the confliction between the electrical large size THz chips and limited space among them, only a few THz arrays operating above 200 GHz have been reported, with most of them adopting a 1-D array configuration to satisfy the $\lambda$ /2 spacing requirement. This makes it challenging to achieve a high-quality radiation beam, high EIRP, and a 2-D scalable planar array. To overcome those challenges, a 2-D triangular lattice array is proposed and derived using the array factor (AF) formula, and subsequently utilized in the design of a 4 $\times$ 4 TX array integrated with a multilayer waveguide package. Consequently, distinct advantages are obtained, including enhanced EIRP and scalability. As a proof-of-concept, a 220-GHz 4 $\times$ 4 TX array was developed and fabricated by employing hybrid technologies, including a 130 nm silicon-germanium bipolar junction transistor and the complementary metal-oxide-semiconductor transistor (SiGe BiCMOS) process, a full-metal micromachining process, and a multilayer printed circuit board (PCB) technology. Experimental results demonstrate that the developed TX array achieves a peak EIRP of 42.7 dBm with a 3-dB radio frequency (RF) and width of 40 GHz, supporting a real-time wireless communication data rate of 18 Gbps with 16-quadrature amplitude modulation (QAM) at 100 m. The proposed TX array demonstrates several advantages, including a super high EIRP, extended communication range, high data rate, low cost, high integration, and compact size, making it well-suited for the THz wireless communication systems.

22 October 2020 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
ZWZhanyuan Wang
Zhanyuan Wang
ZJZhengbo Jiang
Zhengbo Jiang
Zhang-cheng HaoZhang-cheng Hao
Zhang-cheng Hao
Wei HongWei Hong
Wei Hong
This letter presents a novel probe selection method for multiple-input-multiple-output (MIMO) over-the-air (OTA) testing. It can effectively reduce the number of probes used in anechoic chamber, which further reduces the ports of the channel emulator (CE). Two basic channel models are used to validate the performance of this method. The simulation results demonstrate that it can reconstruct the channel environment around the device-under-test (DUT) in a multiprobe anechoic chamber with high accuracy. In addition, the impact of different probe configuration setups on the accuracy of test results are discussed.